Author	[Modern View]
lyle niemi 11-17-2012 06:13:30 209.91.107.162 Report to Moderator	I had a shaft built at a machine shop and installed it yesterday, things seem to be running true [Reply]   [No Email]
lyle niemi 11-17-2012 14:48:20 209.91.107.244 Report to Moderator	Re: Update on TD18 in reply to pete black, 11-17-2012 06:13:30   Quoting Removed, click Modern View to seeI know of them couplings, my planer has something simular to that [Reply]  [No Email]
lyle niemi 11-17-2012 14:10:59 209.91.107.140 Report to Moderator	Re: Update on TD18 in reply to pete black, 11-17-2012 06:13:30   Quoting Removed, click Modern View to seeI am thinking the same thing, gonna try it tho. If that dont work I have to get a different kind of coupling, there isnt much room [Reply]  [No Email]
Janicholson 11-17-2012 14:32:47 199.17.6.27 Report to Moderator	Re: Update on TD18 in reply to lyle niemi, 11-17-2012 14:10:59   Scroll down on this page. the second item is what I would do. It would bolt on as your yoke adapter is now. Since all the holes are concentric, it should be fibne and dandy. Jim My idea [Reply]  [No Email]
Janicholson 11-17-2012 11:34:59 96.24.99.126 Report to Moderator	Re: Update on TD18 in reply to lyle niemi, 11-17-2012 06:13:30   It looks like fine machining. I think that the Ujoint is going to be a mechanical fuse. Meaning that it might just be too small to allow the torque of that 6 cyl to be tamed. Jim [Reply]  [No Email]
RBnSC 11-17-2012 06:51:49 76.73.221.117 Report to Moderator	Re: Update on TD18 in reply to lyle niemi, 11-17-2012 06:13:30   Nice setup. I'm guessing you are going to finish the mechanicals before you repaint..:) Ron [Reply]  [No Email]
ShadetreeRet 11-17-2012 06:48:57 184.4.21.191 Report to Moderator	Re: Update on TD18 in reply to lyle niemi, 11-17-2012 06:13:30   I hope it stays that way, you have had enough problems lately. [Reply]  [No Email]