Tractor weight question, any of these of any value??

OliverGuy · Nov 6, 2012

Can you see if there is anything that you guys recognize in this pile? I bought these as a group one day, probably for too much. Should I paint up nice and sell or just sell as is? I don't know weights very good. Thanks.

paul · Nov 6, 2012

I bet you'll do all right selling out the sets to people who want them as individual sets!

I'd not paint them, you'll never match the new paint on whatever tractor they go on so it's just wasted.

I think I could make some good guesses, but most of those look at least common wanted types.

See then go $50 - $100 a wheel.

--->Paul

Vito · Nov 6, 2012

I would sell as is.Usually go for about 50 cents a pound in my area.

HTH

Vito

rustyfarmall · Nov 6, 2012

You've got one complete set of the IH split weights. (4 pieces) Those weights will fit everything from the Farmall C up through the last tractor built by IH before it became Case-IH. The set of 4 pieces should be worth Around $100 as is.

wilson ind · Nov 6, 2012

what is the weight of each half on the I_H and is the round weight I-H same as 2 halfs?

ejr-IA. · Nov 6, 2012

The 460 560 slab wieghts are good property,also the front red bring good money.Two 1/2 wht.are 150lb.

robgIN · Nov 6, 2012

The F&H weights will fit a lot of different makes , including JD, and we all know those JD guys have more money. The front wheel weights are probably the most valuable. Price will vary depending on location.Don't know what you paid but looks like you got a pretty good batch.

OliverGuy · Nov 6, 2012

The smaller red ones are front ih weights you say? What models you think?

toolz · Nov 6, 2012

The four small red weights are from the rear of a Massey combine- I have that exact set. They have the same bolt pattern as a 560 IH wheatland, and other IH standards, probably W9, 600, etc.

Pic is my 560 with the thicker pair installed. I would be interested in those four if you were somewhere close to central IL.

WESnIL · Nov 7, 2012

Depending upon your location I would be interested in what looks like slab weights on the bottom of the stack. Can you get a part number off of them? My email should be open. Thanks.

ohiojim · Nov 7, 2012

they go for a buck a pound here

rustyfarmall · Nov 7, 2012

(quoted from post at 17:31:13 11/06/12) what is the weight of each half on the I_H and is the round weight I-H same as 2 halfs?

I think the IH round rear weights are 145# each.

formerly ny bill · Nov 7, 2012

the 2 round weights on the top of the pile (separated by the 1/2 ih rear weight) are front wheel weights for the 340-460-560 ih tractors. they are fairly scarce, usually people ask $100-125 for the pair.

1206SWMO · Nov 7, 2012

The 460-560 IH front slab weights are hard to find and bring a decent price..I got lucky a few years back and bought 4 of them for $80 total..

About 10 years ago at a farm sale I bought (8) IH half rear weights for $3 each..At the same sale I bought (4) IH full round wheel weights for $6 each.

WESnIL · Nov 7, 2012

Oliverguy: Care to post your contact information? I need to speak with you on these weights. Thanks.

Tractor weight question, any of these of any value??

OliverGuy

Well-known Member

paul

Well-known Member

Vito

Well-known Member

rustyfarmall

Well-known Member

wilson ind

Well-known Member

ejr-IA.

Member

robgIN

Member

OliverGuy

Well-known Member

toolz

Well-known Member

WESnIL

Member

ohiojim

Well-known Member

rustyfarmall

Well-known Member

formerly ny bill

Well-known Member

1206SWMO

Well-known Member

WESnIL

Member

Similar threads