Block for Super 88

Old Bob · Oct 30, 2012

I need a block for my super 88. We have tore it down, ordered our parts to re-build it, and guess what?? Today we were cleaning the block on the inside, and between two of the pistons is a very small crack. There was no anti freeze in the oil, but that crack is still there. Any suggestions?? Where will I be able to find a block?? Thanks in advance I guess as they say: Restoration is Frustration

Old Bob · Oct 30, 2012

If you have a block my phone number is 479-675-6115 or email [email protected]

rrlund · Oct 30, 2012

Try Korves Oliver. I think they claim to have 150 Oliver blocks and heads if memory serves me right.
Korves

rustred · Oct 30, 2012

if the block just has a small crack between the sleeves on top it will not hurt a think. most of them crack there. just as long as the sleeve is not cracked. post a pic of the crack. the head gaskt. seals that anyhow.

Old Bob · Oct 30, 2012

Mine is cracked on bottom where the o rings go. Called Korves already, mark is not sure if they have one. Thanks.

rustred · Oct 30, 2012

yep, u need a block or get that one repaired.

Old Bob · Oct 30, 2012

What does repaired mean??? Where can I get it done?? How expensive??? Sorry for all the questions, but I appreciate your concern. Thanks

Will Herring · Oct 30, 2012

I've seen block repairs before, and it sounds like your crack isn't that severe (in fact, it may be somewhat typical, but I'm not an Oliver guy). I think they do pinning or magna-flux or something. Probably not cheap, but it depends on how easy it is to get a replacement block, as well.

rustred · Oct 30, 2012

you will need to check around and find a machine shop that specializes in block repair. it can be welded and then remachined to the proper spec's. usually this type of work is not cheap. it is not the sort of work that a beginner would tackle, need to find a reputable shop. it is fixable.

Block for Super 88

Old Bob

Member

Old Bob

Member

rrlund

Well-known Member

rustred

Well-known Member

Old Bob

Member

rustred

Well-known Member

Old Bob

Member

Will Herring

Well-known Member

rustred

Well-known Member

Similar threads