(800) 853-2651
SHOP NOW

Time to mow the bush hog

Z

Zachary Hoyt

Well-known Member
Kind of like vacuuming the vacuum cleaner.
Zach
a86588.jpg

a86589.jpg
 
Zack looks like you need to sell me that OLD HOG as you must not use it that much. Tha tail wheel may have taken roots. LOL Jim in FL
 

I went to hook mine up a few days ago and it had a pretty good stand going on it. We had a pretty dry summer here in NH but Late September-October has been very wet.
 
Zach, Anytime you use an implement there are two things you should do. Before going to the field a thorough PM. Grease, oil, air etc.
When done , park it up by the shop and go over it with the air hose and the three foot blow gun.
Will double the life of your implement.
All that grass, hay, and dirt holds WATER, and that in turn make rust.
 
(quoted from post at 07:03:45 10/21/12) Zach, Anytime you use an implement there are two things you should do. Before going to the field a thorough PM. Grease, oil, air etc.
When done , park it up by the shop and go over it with the air hose and the three foot blow gun.
Will double the life of your implement.
All that grass, hay, and dirt holds WATER, and that in turn make rust.
Click to expand...

and block the front end and cover it with a plastic tarp from lowes..8 bucks..
 
(quoted from post at 08:28:32 10/21/12)
(quoted from post at 07:03:45 10/21/12) Zach, Anytime you use an implement there are two things you should do. Before going to the field a thorough PM. Grease, oil, air etc.
When done , park it up by the shop and go over it with the air hose and the three foot blow gun.
Will double the life of your implement.
All that grass, hay, and dirt holds WATER, and that in turn make rust.
Click to expand...

and block the front end and cover it with a plastic tarp from lowes..8 bucks..
Click to expand...

Plastic tarps may make you feel good but they don't do anything to help your equipment
 
Mine looks like around this time of year too. I clean it off every week or so but everything has seeded out and its so wet it germinates immediatly.
 
You must log in or register to reply here.

Similar threads

J
8N Hydraulics - will not lift after mowing with bush hog
Replies
10
Views
431
Duner Wi
D
B
What rpms to run bush hog
2
Replies
20
Views
805
Fawteen
Fawteen
J
8N Hydraulics - will not lift after mowing with bush hog
Replies
6
Views
303
Eman85
E
F
Should the Bottom Surface on a New Bush Hog Be Coated
Replies
3
Views
188
jwal10
J
P
Bush Hog ZT 18 Please help Identify year
Replies
2
Views
124
Ponce
P
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top