O-ring for McCormick separator

blinwmiaol.com · Oct 17, 2012

I have a 3S McCormick separator that the o-ring that seals the spinning jar deteriorated and ripped. Does anyone have any ideas where I can find a replacement? Can't run milk thru it till I find a new one. Thanks

greygoat · Oct 17, 2012

Any good hydraulic shop will have various cross
section,(thickness) O-rings from 1/8 to 6 inch diameter. Or, if you know dementions,Google
"Baum Hydraulics", go to: O-rings!

Dick2 · Oct 17, 2012

I needed a large O-ring once, so went to a local manufacturer & distributor. Walked up to the counter and asked the guy if they had that size O-ring. He asked me how many thousand did I want? Told him I just needed one. He went and got it and didn't want to write up an invoice for just one O-ring. I left a couple bucks on the counter and walked out with the O-ring.

gitrib · Oct 17, 2012

Got one at a O ring shop one time. If you are under inspection to not mention it as try will see if it was made food grade. crazy inspectord.gitrib

wisbaker · Oct 17, 2012

McMaster Carr and Grainger both sell a wide variety of O rings if you can ID the one you have in size diameter and material. Hydraulic shops or power train distributors and even Fastenal should also be able to get you one.

60 acre hillside · Oct 17, 2012

A local machine makes them. I do not know how they vulcunise them togrether but they buy the material in a roll

ramtuff · Oct 17, 2012

any brand of super glue,used it for years making o-rings large an small.

O-ring for McCormick separator

blinwmiaol.com

Member

greygoat

Well-known Member

Dick2

Well-known Member

gitrib

Member

wisbaker

Well-known Member

60 acre hillside

Member

ramtuff

Member

Similar threads