Delta Red was closest

Dave from MN · Sep 20, 2012

It was at the top of the clean grain elevator, wedges between the chain and sprocket, bent 90 degrees. It was made in china thank good ness. Was a real bugger to get out, but checked everything out and did aboput 100 bushel with no issues. No pic as the camera was MIA. I do recall now utilizing (3) 15/16's, and only putting 2 away. My bad.

Kow Farmer · Sep 20, 2012

Glad you found the wrench and combine is still going. Good luck with harvest.
Kow Farmer

donjr · Sep 20, 2012

Ya lucked out on that one.

DeltaRed · Sep 20, 2012

Glad the machine wasnt hurt.That kind of stuff can be a real PIA!BTDT.Hang the wrench on the shop wall as a reminder....Steve

Brokenwrench · Sep 20, 2012

Hopefully the camera didnt suffer the same fate as the wrench.

BW

JDseller · Sep 21, 2012

Dave you just found out why I have all my tools in racks,boxees or pouches. I clean and put all the tools away before I start anything up. I have found several wrenches and hammers in places that would have done lots of damage if I had not found them BEFORE I ran the machine.

Delta Red was closest

Dave from MN

Well-known Member

Kow Farmer

Well-known Member

donjr

Well-known Member

DeltaRed

Well-known Member

Brokenwrench

Member

JDseller

Well-known Member