Author	[Modern View]
Dale in nw wa. 09-07-2012 20:39:24 67.206.185.76 Report to Moderator	Ok I have a Question I have a DC4 I don't have the SS numbers someone removed them. This tractor has 15in front tires on front. The rims are solid CAST iron With 3 bolts ataching them to spindles. It does have a foot clutch live power take off and a remote hyd. Casenutty this is the same tractor that I lost rod bearing in Thanks Dale [Reply]   [No Email]
Case Nutty 1660 09-08-2012 09:37:27 75.127.24.27 Report to Moderator	Re: Question on DC4 in reply to Dale in nw wa., 09-07-2012 20:39:24   on the carb side of the engine bellhousing the serial will be stamped and correct if block is original will start with DC cnt [Reply]  [No Email]
Dale in nw wa. 09-10-2012 20:23:31 67.206.184.34 Report to Moderator	Re: Question on DC4 in reply to Case Nutty 1660, 09-08-2012 09:37:27   Ok I found the numbers on motor they start out with DC 8027675 APCC these were found on engine Web [Reply]  [No Email]
Super Trucker 09-08-2012 05:38:46 99.150.161.21 Report to Moderator	Re: Question on DC4 in reply to Dale in nw wa., 09-07-2012 20:39:24   With a foot clutch I belive they were only in late 53 and 54. [Reply]  [No Email]
Dick2 09-08-2012 01:22:46 174.19.205.113 Report to Moderator	Re: Question on DC4 in reply to Dale in nw wa., 09-07-2012 20:39:24   Don't know what the question is, but the DC4 had cast wheels to add weight to the front end. It has a short wheelbase, so the weight is needed to keep the front end on the ground. We had the rods bearings go out on out DC4 too, but it was because of a bad barrel of oil from Standard oil company. The oil had some kind of fiber floating in it that plugged the oil screen. Standard oil denied any responsiblity for it, so we dropped Standard Oil and haven't given them any business in the last 55 years. [Reply]  [No Email]
Janicholson 09-07-2012 20:44:28 96.24.99.126 Report to Moderator	Re: Question on DC4 in reply to Dale in nw wa., 09-07-2012 20:39:24   What is the question? Jim [Reply]  [No Email]