Hello guys. I need some help with my 175b loader. It does not have pushing power. I have to use in low range 1gear.
When put in second gear the drive shaft to transmission stops turning. When at idle drive shaft turns. The torque converter preassure reads good on gauge. Any advice would be good.
Same happens when in reverse. Operates in 1gear and any other gear shaft stops turning.
When put in second gear the drive shaft to transmission stops turning. When at idle drive shaft turns. The torque converter preassure reads good on gauge. Any advice would be good.
Same happens when in reverse. Operates in 1gear and any other gear shaft stops turning.