DPA 3232398

W.Brian Driggers · Aug 8, 2012

Help Needed...I need to know how to seperate just the top half of my pump to replace the o-rings and gasket. I just want to replace these because they are leaking a small amount of fuel, other than this my tractor works great. Thank you for any help u can give me.

Brian

Wayne in MN · Aug 8, 2012

It helps to know the make , model, & year of machine you are working on.

RodinNS · Aug 8, 2012

I generally prefer to remove the pump from the engine myself unless it has clear easy access. My fat fingers don't work so well in confined spaces.
Beyond that you just remove the throttle and shutoff levers from their shafts and IIRC there's a couple more nuts that hold the cover down. Cover should just lift off then. When you raise it a bit you're going to see the govenor spring hooked to the tombstone... and MAKE SURE you not what holes are used for the spring on both ends. Unhook it and be sure to return it to where it was when you reinstall. Also be carefull of the shutoff bar that it's positioned correctly if it has a manual shutoff...

Rod

W.Brian Driggers · Aug 9, 2012

I an working on a 1962 MF35 diesel deluxe with the Perkins 3 cyc.
Thank You

RGMartin · Aug 9, 2012

(quoted from post at 17:00:32 08/08/12) It helps to know the make , model, & year of machine you are working on.

A CAV DPA is a CAV DPA...

DPA 3232398

W.Brian Driggers

New User

Wayne in MN

Well-known Member

RodinNS

Well-known Member

W.Brian Driggers

New User

RGMartin

Well-known Member

Similar threads