Author	[Modern View]
al in mmn. 07-10-2012 18:03:56 173.19.113.237 Report to Moderator	i have a john deere 510 round baler,we changed out the bearings on the drive roller(both sides),reassembled and went to try it and the drive gears (52 tooth,and 22 tooth) were not tightly meshed. engaged it and filings were be thrown up from the big gear.almost wore out almost half of the life of the gear.could use some help to figure it out? thanks [Reply]   [No Email]
Tx Jim 07-11-2012 09:56:22 67.142.163.26 Report to Moderator	Re: john deere 510 round baler in reply to Duner Wi, 07-10-2012 18:03:56   Maybe the problem lies with the pivots(parts key #11)???????? If you notice brg bores of parts keys #25 & 30 should limit space between gears if brgs & pivots are seated properly. [Reply]  [No Email]
al in mmn. 07-11-2012 09:54:07 173.22.254.247 Report to Moderator	Re: john deere 510 round baler in reply to al in mmn., 07-10-2012 18:03:56   only one half of big sprocket (?) is chewed really bad, small one is okay, like it is bent or cock-eyed in there [Reply]  [No Email]
Tx Jim 07-11-2012 03:15:08 67.142.163.26 Report to Moderator	Re: john deere 510 round baler in reply to John T, 07-10-2012 18:03:56   al in mmn. Are you positive you got the new brgs centered in their mounting holes correctly??? Are these the rollers & gears in question? reason I ask is parts shows one is 22 & the other is 51 tooth.? It's been way to long since I've looked behind a 510 twine box to remember. This post was edited by Tx Jim at 03:29:20 07/11/12. [Reply]  [No Email]
al in mn. 07-11-2012 09:50:38 173.22.254.247 Report to Moderator	Re: john deere 510 round baler in reply to Tx Jim, 07-11-2012 03:15:08   i thought we did, or how do you tell if you did or not? All seated together well and nuts were all real close to equal threads shown [Reply]  [No Email]
sotxbill 07-10-2012 18:38:28 70.234.245.155 Report to Moderator	Re: john deere 510 round baler in reply to al in mmn., 07-10-2012 18:03:56   doesnt a chain go through there? [Reply]  [No Email]
al in mmn. 07-10-2012 19:41:15 173.19.113.237 Report to Moderator	Re: john deere 510 round baler in reply to sotxbill, 07-10-2012 18:38:28   yes, on one side it is and the other it is two gears(behind the twine box) [Reply]  [No Email]