Hydraulic remotes leaking on JD 6310 cab tractor

Anonymous-0 · Jun 25, 2012

I have a JD 6310 and have never had any problems out of it. All 3 hydraulic remotes leak off quick. I can lift my discbine and within 10-15 seconds its starts lowering itself at a decent rate. Where do i need to look? What could be the problem? The overflow bottle is full of hydraulic oil. Thanks guy

rufus80 · Jun 25, 2012

Does it do it with all implements or just the discbine? If just the discbine it is probably the cylinder on it that is leaking thru the piston seals.

Reid1650 · Jun 25, 2012

does it with all implements. Wont hold my roll baler pickup in the up position either. Thank you

JDseller · Jun 26, 2012

I would start with the orings in the couplers. They go around the tips when you plug the hoses in. They get chewed up with rough tips. The orings are in the couplers. It also could be the coupler spoons leaking too. The 6000 series are bad about them going bad.

Hydraulic remotes leaking on JD 6310 cab tractor

Anonymous-0

Well-known Member

rufus80

Member

Reid1650

Member

JDseller

Well-known Member

Similar threads