Deutz 5506

Susan Dryden · Jun 10, 2012

Does anyone know where the input is for power steering fluid?

Anonymous-0 · Jun 10, 2012

power steering might be part of the hyd system???

Susan Dryden · Jun 10, 2012

Hydraulic gear oil does not help the steering. Must be a place for power steering fluid.

flying belgian · Jun 10, 2012

Follow the lines back from the steering cylinder.

Anonymous-0 · Jun 10, 2012

(quoted from post at 19:47:35 06/10/12) Hydraulic gear oil does not help the steering. Must be a place for power steering fluid.

Give it a little bit, maybe one of them smart texans'll chime in wif a good answer.... Watch for texasmark... he's purty slick sometimes and seems ta be bored about now.....

Down under farmer · Jun 11, 2012

Well i guess it would be the same as 6206/7206 or the 2 newer dx series we have. The power steering runs off the hydraulic pump so it uses hydraulic oil from the reservoir under the seat same as the rest of the hydraulic system. Check the manual but ours run the same weight oil in the hydraulics as the moter.

jiminct · Jun 11, 2012

(quoted from post at 19:34:55 06/10/12) Does anyone know where the input is for power steering fluid?

assuming that the 5506 is 1 of the older air cooled models, many of them didn't have power steering if i'm not mistaken, but i think that depended on 2wd or 4wd. i think the power steering on those are run off the main hydraulic pump. best thing would be check your manual if you have one.

syco 1 · Jun 11, 2012

slide seat ahead plastic cap with dipstick single res for all hyd. 18 year deutz mech.

Susan Dryden · Jun 12, 2012

Thanks to all. Hydraulic system controls all. Found input for that. Will test in the morning.

Deutz 5506

Susan Dryden

New User

Anonymous-0

Well-known Member

Susan Dryden

New User

flying belgian

Well-known Member

Anonymous-0

Well-known Member

Down under farmer

Member

jiminct

Member

syco 1

Member

Susan Dryden

New User

Similar threads