air impact

Anonymous-0 · May 31, 2012

I have a 1 inch air impact it was brand new last year hasnt done a lot over winter it sat in it case just in a shed went to use it today and it was siezed up finaly got it going but not working 100 percent yet ive been pouring hyd oil down the air intake is they any thing tht be better to use to clean it up still has i dead spot in it and have a hard time getting it to go again

old · May 31, 2012

WRONG oil big time. Flush it out with a good cleaner like brake spray cleaner then use a GOOD air tool oil. And hope you get to it very soon or you can have the vanes in the tool expand and then your going to need a rebuild of the tool. Spent a few years working at Tracker Marine as an air tool repair person till I got a promotion to told factory repair and the wrong oil in them causes funny problems

doubleN · Jun 1, 2012

Flush it with kerosene and add air tool oil.

greygoat · Jun 1, 2012

Flush it with a light solvent..then use Marvel
Mystery Oil. When I worked in the Railroad
Locomotive Repair Shop, Marvel Mystery Oil was
the only thing we used for air tool oil.

hd6gtom · Jun 1, 2012

As the others said, ONLY use air tool oil in air tools.

air impact

Anonymous-0

Well-known Member

old

Well-known Member

doubleN

Member

greygoat

Well-known Member

hd6gtom

Well-known Member

Similar threads