Plow for MH 44

David G · Apr 29, 2012

I am putting the MH 44 back together. It will have 277 CI engine
with high compression pistons and 14.9x38 tires.

Do you think it will work with 3-16 plow?

Leroy · Apr 29, 2012

Neighbor when they were new pulled 4-14" plows with them.

BushogPapa · Apr 29, 2012

Assuming you do not have extremely high compression, have real tread on the tires (NOT "Pulling Tires") and maybe a little weight, you should be able to pull it in most soils and conditions..
277 in would be plenty, Dad's AC WD-45 was delivered with 4x14" and never trouble pulling it and that had 226 Cu in..All tires were Loaded, tho..

Ron..

David G · Apr 29, 2012

I have my 6610 to pull it if needed, but would like to use the 44 if possible.

DoubleR · Apr 29, 2012

Back in the day, a neighbor pulled a 3-16 oliver trailer plow and a clod buster with his. He had a dual on the ground side most of the time. It was his big tractor on a 300 acre farm.

David G · Apr 29, 2012

It was my dads tractor, getting it running after 7 years.

flying belgian · Apr 29, 2012

My neighbor in the day pulled 3-16 with his. Then he got a 55 and a 4-16 Case. That was to much plow when he went through them low tough spots. Seamed like them Case plows always pulled harder then others.

onefarmer · Apr 30, 2012

Was used to have a JD720 and still have a MH44. I used to figure they were fairly even match in power, maybe a bit advantage for the JD and the JD would pull 4-16s so 3-16s would seem a good fit for the MH44.

Plow for MH 44

David G

Well-known Member

Leroy

Well-known Member

BushogPapa

Well-known Member

David G

Well-known Member

DoubleR

Well-known Member

David G

Well-known Member

flying belgian

Well-known Member

onefarmer

Well-known Member

Similar threads