Bularus (sp) 250AS drive problems

old · Apr 11, 2012

Got a call from a guy who owns one and said he was tilling with it and all at once the tiller started pushing it around. Siad if has no drive power in any gear and also said it feels funny trying to put it in reverse. So any ideas as to what may have gone out and where in the heck do you find parts for one??
Thanks

Janicholson · Apr 11, 2012

Old, there are many possible issues, but here are a few.
Wheel not clamped to axle (sheared Key or clamp)
Bad clutch (especially if he was using the clutch to go slow enough to till with a tractor that moves too fast (serious possibility)
Clutch hub stripped
Input shaft splines gone,
These are a few I would start with.
Look at the axles first.
Then pull a cover on the clutch to see if things turn when the clutch is released (be careful)
If they do, pull a cover or plug in the trans to see if things turn there when the clutch is out.
If not input splines might be it. Jim

old · Apr 11, 2012

The way he talked the transmission was being used to hold the tractor back because the tiller would try to push it and cause the tractor to move to fast and then all at once the tiller started pushing the tractor and none of the gears would work

rrlund · Apr 11, 2012

How familiar is the guy with it? Has he had it long? If it's like a Zetor,they've got about half a dozen shifts that all have to be in the right place at the right time. I wonder if something just popped out of gear?

Chip812 · Apr 11, 2012

I've got a Belarus 250AS sitting on my property (covered in kudzu)... in my opinion, it ain't worth the scrap price...
8)

Bularus (sp) 250AS drive problems

old

Well-known Member

Janicholson

Well-known Member

old

Well-known Member

rrlund

Well-known Member

Chip812

Member

Similar threads