Oliver 88

Anonymous-0 · Apr 4, 2012

How do I tell if my 88 is a Super or a row crop?

Tramway Guy · Apr 4, 2012

Do you mean Super or Fleetline? Rear axle diameter on the fleetline was 2.75"; on the Super it was 2.875".
Serial number would give it away, also.
Both supers and fleetlines were available in Row Crop.

Janicholson · Apr 4, 2012

Oliver Super88 series were available in High crop, Row Crop, Wheatland, and (I think) Orchard versions. To see them, google Images Oliver Super88. Jim

Wheat Farmer · Apr 4, 2012

What is the serial number. If it is a number starting with 1 it is a row crop, if it starts with an 8 it is a Std. if it is a 3 or a 4 I don't know. Per my Hot Line book.

old · Apr 4, 2012

From what I was told the Oliver 88 and 77 standard where in fact Supers but the serial numbers tell the big story and if the sheet metal is all there that also tells a story in its self if the correct metal that is

Ralph Bauer · Apr 5, 2012

Have you tried posting it in the Oliver and Cockshutt forum, a lot more Oliver traffic there.....compared to here...

rrlund · Apr 5, 2012

The frame. The Fleetlines just had the 2 large cultivator pipe holes. The Supers had 2 flat pads on aech side with bolt holes drilled and tapped in them in addition to the large pipe holes.

Anonymous-0 · Apr 5, 2012

Thank you all. Question Answered.

Oliver 88

Anonymous-0

Well-known Member

Tramway Guy

Well-known Member

Janicholson

Well-known Member

Wheat Farmer

Well-known Member

old

Well-known Member

Ralph Bauer

Well-known Member

rrlund

Well-known Member

Anonymous-0

Well-known Member

Similar threads