in-too-deep
Well-known Member
Thanks for all the suggestions folks! Armed with a putty knife and a small flat pry bar (both sharpened with a bevel) Miss MN and I went after it. We didn't try to get every scrap of glue, cause the sander will do that. I tested with my belt sander and it didn't clog it up. Got about half done and ran out of elbow grease. Going to rent a sander tomorrow and strip the other half...probably hafta scrape it too.
I'd like to find the guy that did this to a perfectly good oak t+g floor and have him strip it while I drink beer.
I'd like to find the guy that did this to a perfectly good oak t+g floor and have him strip it while I drink beer.