My new back blade.....

Anonymous-0

Well-known Member
Worked like a charm and made poo cleanin go slick. During the freeze, I couldn't clean (shovel) so Had some scrapin to do today... Worked real fine and I decided to work on some ruts that I'd been making. Some was still frozen.. Blade held up like a champ, but the part where it swivels/pivots didn't fair the best. Not a big deal, just bent a little but not shot. Shows the stress points that can be reinforced and I'll have something useable.....
 

One of the improvements I made on my TSC 7' rear blade was to attach a good piece of chain from Lower Center of the blade, up to the front cross-member of the blade frame..
I also changed from the 1/2" bolts to 1" Hard bolts..then re-welded everything...!!

Ron..
 
(quoted from post at 17:02:48 02/18/12)
One of the improvements I made on my TSC 7' rear blade was to attach a good piece of chain from Lower Center of the blade, up to the front cross-member of the blade frame..
I also changed from the 1/2" bolts to 1" Hard bolts..then re-welded everything...!!

Ron..

I'll try to remember to take a couple pics in the next few days... Blade and hitch part are fine, just where it swivels is kinda chincy.....
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top