old disc harrows

Nebraska Kirk

Well-known Member
I took some pictures of some old farm equipment on an abandoned farmstead, among the stuff there are a couple of disc harrows. Here are some pictures. I am pretty sure the small one is an IH, but I am not sure about the other one, I could not find any markings other than part numbers which all started with an E.

100_5824.jpg

100_5822.jpg

100_5823.jpg

100_5829.jpg

100_5830.jpg

100_5831.jpg

100_5832.jpg

100_5833.jpg

100_5834.jpg
 
The implements with discs look to me to be disc plows. Some look like they have hitches to pull another disc to increase width of cut.Disc plows are a primary tillage tool used mostly in the western states. To my way of thinking a single or tandom disc is more of a finishing tool in the spring unless used in fall to prepar the ground for fall plowing at which they would nopt have any horrows or other finishing attatchments attatched to them. I am in east central Il. where we used moldboard plows but there a few disc plows in the sandy ground areas of the state. By the way is their a picture or video missing, moved, or deleted? I only counted 8 images (pictures) and a moved or deleted notice. Armand
 
The first two pictures are an Emerson. I've had several over the years, I have one setting out back now. They were one of the first company's to offer a oneway.
 
To me a "disc" is a clod-buster,finisher.With the furrow wheels and lift,that looks like a plow.Tell us more about the antique cinder blocks!!
 
If you want to look for operators or parts manuals look for DISK TILLER and not one way as disk till ers is factory usage and one way is farmer usage.
 
Technically they are not disc plows. According to the pictures and information I have seen, disc plows had the discs further apart and set at a noticeably different angle. The International Harvester literature I have found actually calls them Harrow-Plows, they combined features of the disc harrow and disc plow into a single machine.

CH Wendel's book "150 years of International Harvester" has several good pictures and descriptions of both the Disc Plow and the Harrow-Plow
 
As others have said, Disc- tillers, not harrows. A disc tiller has one axle, with some bearings, that connect via a common axle. A Disc-plow , each bottom has a set of 2 bearings, individually capped and sealed, with no axle at all. A disc harrow has 4 gangs, with each gang, having common bearings. Another variation, was the tiller-seeder. It was a disc tiller, with a grain seeder box, on top, to plant small grains in semi-arid areas, where there was no other tillage.
 
Tom,There what we used to call 3 hole blocks,which was a average run of blocks,They were made around here untill the 80s

jimmy
 
Better grab that 2 btm JD #4B plow in the back of the photo. Looks pretty good to me. They bring $300- $400 now-a-days.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top