Decals

Anonymous-0 · Dec 30, 2011

Csn anyone tell me an easy way to remove old decals from tractor sheet metal, Have tryed a single edge razer blade didn 't work well

Anonymous-0 · Dec 30, 2011

have you tried a hot air gun/blow dryer??? Maybe from the back side??

showcrop · Dec 30, 2011

If they are real decals as opposed to cut vinyl sheet they are not likely to peel off from my experience. They pretty much bond to the paint in the years of sun.

dixon boy RL · Dec 30, 2011

get what is called a decal remover,looks just like a big pencil eraser and goes on your drill or die grinder. it just rubs it off works slick from when i used it anyway. any auto store should have them. took the decals off the side of my truck last summer and work slick after you learn with it,ya need to rub into the decals,not from ontop.

rustyfarmall · Dec 30, 2011

(quoted from post at 09:42:01 12/30/11) have you tried a hot air gun/blow dryer??? Maybe from the back side??

That would be my recommendation also. If the decals have been in place for many years, nothing short of destroying both the decal and the paint underneath is going to work.

rrlund · Dec 30, 2011

The Agco dealer has some kind of steamer that they use.

rustyfarmall · Dec 30, 2011

Directing a heat lamp on the decal for several minutes should also work.

W.A.S · Dec 30, 2011

I have good luck with EZ off oven cleaner

donjr · Dec 30, 2011

Liberate mom's hairdryer and use it on high, long enough to loosen the adhesive holfing the decal on. Work slowly along the length pulling the decal up as it loosens from the metal--

greygoat · Dec 31, 2011

A spray can of "Permatex" gasket remover will
take them off, but probably some paint too,and
protect your hands and eyes!

Decals

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

showcrop

Well-known Member

dixon boy RL

Member

rustyfarmall

Well-known Member

rrlund

Well-known Member

rustyfarmall

Well-known Member

W.A.S

New User

donjr

Well-known Member

greygoat

Well-known Member

Similar threads