Wilberton

Member
Here's a shot of my three tractors. Two Allis WD's and a 47 Case SC. Only one Allis running presently. Re-doing the valves on the other.
Next project is to get the Case running. I just recently purchased the Case. It sat in a pasture for a couple of years and the cows ate the wiring off. I got it to pull a Case binder I have.
I have a lot of snap coupler equipment for the Alli's: Two 10' discs, 2 bottom plow, post auger, trip bucket, and a 6' blade.
a55501.jpg

a55502.jpg
 
Looks like a good selection of tire and wheels you have there. Ya don't have a Firestone ATF&R 20.8Rx38 laying around there do you?
 

Would be a very good time to put a WD-45 crank in and a D-17 cylinder kit...
Really makes a difference in the HP...!!
Usually, it is best to change to 12 V at that point..
Something to think about..!
That center tractor really looks GOOD...In my mind, I hope it could be my Grandad's WD..it usually had the loader frame on it..
It would lift a full-grown Steer, when we butchered one..or a Hog..
Ron..
 
That top picture is of Larry Miller's yard, the guy I bought the tractor from. I can ask him if he has any tires that size.

That's a Farmall with David Bradley after market power steering in the back. Mr. Miller is 71 and pulls in competition on a Allis WC.
 
I bought the SC to pull this Case Power Binder in front of my barn. I collect steam-era farm equipment. Anything on steel. My favorite color is rust.
a55539.jpg
 
The cows favourite pastime, if you happen to leave a tractor in the same paddock.Made the mistake, only once.
 
About 15 yrs ago I had to go to a friends place and re-wire a 333 Massey Harris. He let it sit a couple of days in the barnyard and his draft horses ate the wiring. He has been a lot more careful since.
Nice Allis, but I prefer green.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top