Farmhand Rakes

HammerS · Oct 17, 2011

Does anyone have a part # for the cardboard like centers? I have a 5 wheel rake and the centers are all about gone.

BarryfromIA · Oct 17, 2011

I made replacements for mine out of 1/8" Masonite. I rough cut with a sabre saw and finished up with a router on a string leash from a center point, and painted them with oil based primer. Barry.

Tony in SD · Oct 17, 2011

They were made of masonite. You can make your own as we did in the 60s & 70s by using a hole saw for the middle hole and placing the wheel in the hole for a pattern then saw the outer circle. If I remember correctly there were J-bolts with fender washers to hold the masonite in place.

DeltaRed · Oct 17, 2011

I made my own out of 1/4"OSB(waferboard).Lay the wheel on a sheet(one 4x8 sheet will do 2 wheels) and trace.Cut with a sabre saw,paint and attach......15 years and coumting

parisspringstom · Oct 17, 2011

I used galvanized flashing cut in circle to make centers for mine.

Farmhand Rakes

HammerS

New User

BarryfromIA

Well-known Member

Tony in SD

Well-known Member

DeltaRed

Well-known Member

parisspringstom

Member

Similar threads