OT:Anyone know what this is called?

RBnSC

Well-known Member
Got this for some work I did.Pto powers tines that turn horizontally not around an axle like a tiller.Appears to have had very little use.Hooked it to our 4020 and it levels ground very nicely. Has brand name on it Leyle.
a48912.jpg

a48913.jpg
 
This tool is used in Europe to incorporate herbicides and insecticides into the soil. Most of these have a grain drill mounted directly on the back of the implement so the final tillage and seeding is done in one pass.
 
(quoted from post at 05:03:31 09/10/11) Got this for some work I did.Pto powers tines that turn horizontally not around an axle like a tiller.Appears to have had very little use.Hooked it to our 4020 and it levels ground very nicely. Has brand name on it Leyle.
a48912.jpg

a48913.jpg

They use them here. One pass and a plowed field is ready to plant.
 
Not anything Land Pride ever made.. Sold land pride since they came in existence and they have never offred anything like that. Looks like something from europe for sure.
 
Yep, roterra. Made for removing rear ends from underpowered tractors. Notorious horsepower hog, A 5 footer probably will absorb 85 horsepower, no problem.
 
Had a 7" footer on the golf course, called a
Lely Roterra Turf Shaper.
Rips, rotatills,levels,compacts and with the seeding attachment will seed and compact all in one pass, does one heck of a job.

RBnSC you might check where you got it and see if the seeder box is there, reason I ask is may be the reason the packer scraper is raised up.
The seed box fits over those 2 stubs you see on each side of that rear rollar frame. The box drives off the left side, if you look real close you can make out the sproket that drives it off the front rollar with a square link type chain.
The seed should drop just in front of that rear rollar so it can give the seed/soil contact.
 
Had a 7" footer on the golf course, called a
Lely Roterra Turf Shaper.
Rips, rotatills,levels,compacts and with the seeding attachment will seed and compact all in one pass, does one heck of a job.

RBnSC you might check where you got it and see if the seeder box is there, reason I ask is may be the reason the packer scraper is raised up.
The seed box fits over those 2 stubs you see on each side of that rear rollar frame. The box drives off the left side, if you look real close you can make out the sproket that drives it off the front rollar with a square link type chain.
The seed should drop just in front of that rear rollar so it can give the seed/soil contact.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top