cubloboy185 12 volt

Anonymous-0 · Aug 29, 2011

The fuse holder on my dash is blown and my tractor will not start. I had to pull it yesterday to crank it.. While it was running the
alternator did not show it was charging. Could this be the fuse or something else.

Janicholson · Aug 29, 2011

Well fixing the fuse holder is a start.
If it will not crank the relay/solenoid on the starter is probably not getting voltage from the Key.
If it starts, the key is getting voltage from the battery. If not the ignition would not work (I assume it does not have a Magneto)
The issue is probably in the switch (failed start contacts in the Start position) or wire from the key S terminal to the relay/solenoid, or the relay solenoid itself. Jim

cubloboy185 12 volt

Anonymous-0

Well-known Member

Janicholson

Well-known Member

Similar threads