how to hook up airseeder fan

h .sanham · Jun 25, 2011

can any one tel me how to hook up hydrulics to run airseeder fan on case 9240

VicS · Jun 25, 2011

I don't know exactly, but it needs to be hooked up hot all the time, or at least the return hose can't be hooked to your hyd valve, when you move the valve to neutral, it shuts off the oil and you will twist the motor shaft off or at least blow a seal out. They make a male hyd end just for this. We was using a hyd sweeper behind a 7130, I had put a tarp strap on the hyd valve and told the guy driving it to leave it alone! Well he shut it off before he had left the yard and blew the seal out. If he had shut it off by moving the lever to float it would have been all right. Hope this helps Vic

VicS · Jun 25, 2011

I don't know exactly, but it needs to be hooked up hot all the time, or at least the return hose can't be hooked to your hyd valve, when you move the valve to neutral, it shuts off the oil and you will twist the motor shaft off or at least blow a seal out. They make a male hyd end just for this. We was using a hyd sweeper behind a 7130, I had put a tarp strap on the hyd valve and told the guy driving it to leave it alone! Well he shut it off before he had left the yard and blew the seal out. If he had shut it off by moving the lever to float it would have been all right. Hope this helps Vic

VicS · Jun 25, 2011

I don't know exactly, but it needs to be hooked up hot all the time, or at least the return hose can't be hooked to your hyd valve, when you move the valve to neutral, it shuts off the oil and you will twist the motor shaft off or at least blow a seal out. They make a male hyd end just for this. We was using a hyd sweeper behind a 7130, I had put a tarp strap on the hyd valve and told the guy driving it to leave it alone! Well he shut it off before he had left the yard and blew the seal out. If he had shut it off by moving the lever to float it would have been all right. Hope this helps Vic

Down under farmer · Jun 25, 2011

Have a look in owneres manual and see if there is a place to put a dump line back in to the hyd oil tank. this line is usualy larger than the normal feed line for the moter and has to have no restrictions. If you carnt find a designated port to attach the dump line may be you could pumb it back through the fill hole or sumthing

how to hook up airseeder fan

h .sanham

New User

VicS

Well-known Member

VicS

Well-known Member

VicS

Well-known Member

Down under farmer

Member

Similar threads