B-275 questions

Posted in the farmall boards also, But i acquired a B-275 international from a friend that recently passed away.

Does anyone know where I can buy brake disks in the US?
Any common problems or weaknesses to the tractor?
How many of them were brought to the US

Thanks in advance!

Pat,

Check my answer to your question over on the Farmall board. It is too long to rewrite here.

Harold H

Er copy and paste?

Roy, do you have any idea if the brakes are set up the same as the German (D series) models? I have a set of discs laying around.

Dave

,
The B275 was the first IHC built utility tractor which was imported in 59, 60, and 61. it was followed by the B414 which continued the same basic design and most components in 62, 63, 64, 65, and a few in 66, and 67. In 1965 IH begain producing the American made I424 in Louisville which continued the same design using some British and some American parts for 65, 66, and 67 and then in 68 the final version of this same basic tractor made in America was the I444 in 68, 69, 70, and 71. Certain models of the same basic tractor are still being built today by Mahandra in India. A large portion of the parts for the B275, B414, I424, and I444 will interchange so parts are not a problem. (If your parts source can't find a listing for B275 or B414 check parts for I424 or I444). In Nebraska test 733 the B275D had 144 cu in, 30.76 dbhp, and 32.88 ptohp. The B414D increased the cubic inches to 154 by increasing the bore from 3 3/8 to 3 1/2 inches which increased the Nebraska test #827 to 32.57 dbhp and the pto hp to 35.99. The I424D also has 154 cu in but tested Nebraska test #911 32.87 dbhp and 36.91 ptohp. The I444D did not receive a new Nebraska test and retained the 424 hp ratings.

Harold H

thank you

Thanks again harold. Im curious if the brakes will definitly
interchange. Or I can have them relined? Im not sure if you can
reline disk brakes?

I am not famalier with any of the IH German tractors but the brakes from the B275, B414, I424, and I444 should all fit.

Harold H