Where to find one of these

Wisconsin Cowman · May 26, 2011

Anybody out there knows where I can find a spline bore hub that I can weld into the center of a sprocket. The spline hub needs to be 1-5/8" in diameter with 12 splines. The hole in the sprocket is 2” so the hub would have to be close. Can turn it down if need too.

tinny · May 26, 2011

try tsc

rrlund · May 26, 2011

Doesn't anybody have anything like that hanging on a "weld-a-sprocket" or "weld-a-hub" rack at a dealership of some kind?

Anonymous-0 · May 26, 2011

Try surpluscenter.com, or maybe McMaster-Carr.

souNdguy · May 26, 2011

ditto on looking at tsc.. my local store has an entire wall of pullies, bearings and sprockets and hubs. has more of them than tractor parts...

soundguy

Wilson · May 26, 2011

Baum iron omaha

Wisconsin Cowman · May 26, 2011

Nobody around where can not find a hub that size that I am looking for. I don't think my local TSC will have it useless store around here. I can find many spline bore hubs but not in my size. I have one more place to check tomorrow.

Wisconsin Cowman · May 26, 2011

Even a spline coupling would work.

steve in wi · May 27, 2011

try bearing inc, in oak creek 1-414-764-7272 ask for craig.

Oldmax · May 27, 2011

What does this fit on, Do you have something that came off it. I used a U-jont and turned it down for a special Spline on a Mower that I built.
Or try this site ( http://www.shoupparts.com/ ) They have one of the largest inventorys I have found of weld on Centers .

TomR Ont · May 27, 2011

Wisconsin Cowman, if this is what your looking for.

Try here,

http://www.surpluscenter.com/sort.asp?catname=powerTrans&keyword=PH80

Where to find one of these

Wisconsin Cowman

Member

tinny

Member

rrlund

Well-known Member

Anonymous-0

Well-known Member

souNdguy

Well-known Member

Wilson

Well-known Member

Wisconsin Cowman

Member

Wisconsin Cowman

Member

steve in wi

Member

Oldmax

Member

TomR Ont

Member

Similar threads