john deere 4230 powershift

foxhoun · May 23, 2011

I have a 4230 powershift while baling hay today it would not move in reverse.Forward worked ok.If I continued to shift from forward to reverse or disengage pto it would finally move in reverse.
Anyone have an idea what coould be wrong?

Mark-Mi · May 23, 2011

Mine was wore in the shift linkage where you move it over to reverse. A common problem.
I took the linkage apart under the cowl and welded it. Mark

showcrop · May 23, 2011

Yes, it's because you are out baling when most of us are under water!!! Now cut it out and play computer games or work on an antique or something until the rest of us can get out there!!!

Tx Jim · May 24, 2011

(quoted from post at 19:10:41 05/23/11) If I continued to shift from forward to reverse or disengage pto it would finally move in reverse.Anyone have an idea what coould be wrong?

If disengaging pto prompted your tractor to operate in reverse then I would suggest checking trans pump psi. It should be 165-170 psi. How long since trans filter was changed and sump screen cleaned?

john deere 4230 powershift

foxhoun

Member

Mark-Mi

Well-known Member

showcrop

Well-known Member

Tx Jim

Well-known Member

Similar threads