Author	[Modern View]
hoof print 12-30-2012 20:35:52 98.16.105.165 Report to Moderator	I need a spindle pulley for an old craftsman drill press I was given. It is a stepped variable pulley 4 sheave, 5, 5, 3, and 2 inch. The original is a browning SCZ3. Sears parts lists this pulley as NLA, and google searches cannot locate a place to actually BUY the thing! Does anybody have a source for this pulley? [Reply]   [No Email]
Jim in MN 12-31-2012 09:37:13 166.152.227.159 Report to Moderator	Re: drill press pulley in reply to hoof print, 12-30-2012 20:35:52   Are you missing the pulley? Or is it damaged or wore out? Is the center splined? [Reply]  [No Email]
hoof print 12-31-2012 11:01:26 98.16.105.165 Report to Moderator	Re: drill press pulley in reply to Jim in MN, 12-31-2012 09:37:13   Jim, I do have the pulley, the center is wallowed out. No splines. [Reply]  [No Email]
Jim in MN 12-31-2012 12:07:33 166.152.227.159 Report to Moderator	Re: drill press pulley in reply to hoof print, 12-31-2012 11:01:26   You might consider having the center of your old pulley bored out and sleeved. [Reply]  [No Email]
awlknottedup 12-31-2012 07:49:07 69.35.168.62 Report to Moderator	Re: drill press pulley in reply to hoof print, 12-30-2012 20:35:52   I looked all over for the same pulley with no success. I started looking for a parts drill press and found a very good drill press for less than the cost of a pulley. The seller told me that he had it in a garage sale but no one wanted that old stuff anymore. [Reply]  [No Email]
hoof print 12-31-2012 11:07:50 98.16.105.165 Report to Moderator	Re: drill press pulley in reply to awlknottedup, 12-31-2012 07:49:07   thanks! I have been keeping an eye out for a parts press [Reply]  [No Email]
ss55 12-31-2012 06:28:31 173.31.19.80 Report to Moderator	Re: drill press pulley in reply to hoof print, 12-30-2012 20:35:52   Browning is still in business. Contact a local bearing supply house, or a national supplier: McMaster-Carr, Motion Industries, etc. Measure your old pulley diameters, belt profile and shaft size, you should be able to find a replacement. [Reply]  [No Email]
hoof print 12-31-2012 05:31:49 98.16.105.165 Report to Moderator	Re: drill press pulley in reply to hoof print, 12-30-2012 20:35:52   Thanks for the suggestions! Gordo, no key, it has a set screw [Reply]  [No Email]
jon f mn 12-30-2012 21:34:09 70.196.111.206 Report to Moderator	Re: drill press pulley in reply to hoof print, 12-30-2012 20:35:52   If these guys don't have it they can get it. Got one for my press there. They will ship it. Untitled URL Link [Reply]  [No Email]
GordoSD 12-30-2012 21:23:25 216.106.253.91 Report to Moderator	Re: drill press pulley in reply to hoof print, 12-30-2012 20:35:52   Arbor and keyway? [Reply]  [No Email]
Lamar Fudd 12-30-2012 20:59:43 50.83.85.57 Report to Moderator	Re: drill press pulley in reply to old, 12-30-2012 20:35:52   Quoting Removed, click Modern View to see Google McMaster Carr and search for 'Step-Cone V-Belt Pulleys'. They have 4-groove pulleys about halfway down the page. Hope this helps. BTW, I've ordered stuff from them and usually get it the next day. [Reply]  [No Email]
Retired Farmer 12-30-2012 20:42:51 207.200.116.12 Report to Moderator	Re: drill press pulley in reply to hoof print, 12-30-2012 20:35:52   If you have a belt and bearing supply store near you they might be able to order one that would work. [Reply]  [No Email]