| Tool Talk Discussion Forum |
Topic: Coats 1001 Balancer
[Return to Forum]
| Author |
[Modern View]
|
| Lazy WP
12-27-2012 17:59:52
184.63.77.143
|
I put new tires on the ranch pickup tonight, and had a terrible time trying to get them balanced. Took a dozen tries on the last one, and got it with in an oz. I have used this thing before, and fought with it some, but NEVER like tonight. Am I missing something? I just use it for the ranch work, but have balanced a couple dozen sets of tires this year.
|
|
|
| Lazy WP
12-31-2012 16:37:04
184.63.77.143
|
|
Re: Coats 1001 Balancer in reply to Lazy WP, 12-27-2012 17:59:52
|
|
| RGMartin
12-29-2012 07:03:01
98.16.79.4
|
|
Re: Coats 1001 Balancer in reply to Lazy WP, 12-27-2012 17:59:52
|
|
| Could be rust and crud built up in the sensors. there is ball bearing and a spring in there, seems to happen when it is used infrequently. Some compressed air and penetrating oil worked wonders. I went through with my own machine (950A???).
Mine currently doesn't show anything on the display. Probably cost more to get fixed than it is worth to me.
This post was edited by RGMartin at 07:03:25 12/29/12.
|
|
|
| Hobo,NC
12-28-2012 18:14:15
98.16.2.64
|
|
Re: Coats 1001 Balancer in reply to MarkWV, 12-27-2012 17:59:52
|
|
|
| Lazy WP said: (quoted from post at 05:59:52 12/28/12) I put new tires on the ranch pickup tonight, and had a terrible time trying to get them balanced. Took a dozen tries on the last one, and got it with in an oz. I have used this thing before, and fought with it some, but NEVER like tonight. Am I missing something? I just use it for the ranch work, but have balanced a couple dozen sets of tires this year. |
You may not have the correct adapter for for rim... I have ran into that some use the center and some need a adapter that uses the lug bolt pattern (like my 77 ford F350)...
This post was edited by Hobo,NC at 18:14:43 12/28/12.
|
|
|
| Jthomas1970
12-28-2012 12:37:37
75.145.51.69
|
|
Re: Coats 1001 Balancer in reply to Lazy WP, 12-27-2012 17:59:52
|
|
| Sounds like your machine needs to be calibrated. There is a whole procedure in the owners manual. If you don"t have one, you can get it on Coats web site.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
