Author	[Modern View]
GUIDO 12-19-2012 12:44:08 71.168.249.98 Report to Moderator	Hello, Here is one I have not used for many moons. What is it? Guido. [Reply]   [No Email]
ASEguy 12-20-2012 15:48:44 68.186.162.134 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   Hey Guido...I have a automotive hose cutter that looks similar only not as beefy. [Reply]  [No Email]
GUIDO 12-21-2012 07:02:09 71.168.249.98 Report to Moderator	Re: Tool Challenge! in reply to ASEguy, 12-20-2012 15:48:44   Hello ASEguy, It is hard to get close enough to get more detail of a tool at times. The automotive one you have has a sharp blade. They use that kind of tool for pastic pipe as well. Mine has a blunt center for crimping not cutting, Guido. [Reply]  [No Email]
GUIDO 12-20-2012 13:38:14 71.168.249.98 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   Hello, It is a crimper for thinwall metal pipe. Guido. [Reply]  [No Email]
downsouth 12-20-2012 05:35:23 64.12.116.141 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   Hemorrhoid removal tool, hand operated and completely painless. [Reply]  [No Email]
John A. 12-19-2012 20:50:10 64.128.16.238 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   Guido, I am with sotxbill here those look like ear notchers to me. In the Panhandle we has a Heart shaped one! Later, John A. [Reply]  [No Email]
t.r.k. 12-19-2012 18:51:39 71.31.64.233 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   I bought one of those because it looked like it would crimp stove pipe to help the pieces fit together. (I still think it would and I intend to try it next time.) Then I learned that the ones HVAC guys use for stove pipe/sheet metal duct work have multiple jaws.(like 3 on one side, 4 on the other.) I was passing the kitchen counter;bath tile area in a home store and they had a tool like that to break the tile after its scored. . . . So that is what it is. [Reply]  [No Email]
wgm 12-20-2012 17:53:06 66.11.102.200 Report to Moderator	Re: Tool Challenge! in reply to t.r.k., 12-19-2012 18:51:39   Real sheetmetal workers use the single crimper. [Reply]  [No Email]
farmerjohn 12-19-2012 18:30:42 173.75.148.142 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   A vice. [Reply]  [No Email]
PJH 12-19-2012 18:20:42 50.44.232.10 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   Fence wire tightener? [Reply]  [No Email]
WGWKy2 12-19-2012 16:41:16 98.23.24.183 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   BOOT! sorry been a slow day [Reply]  [No Email]
Diydave 12-19-2012 16:24:03 96.244.165.238 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   oh what the heck, is it a drywall nibbler? [Reply]  [No Email]
Brad Buchanan 12-19-2012 15:10:32 74.71.185.165 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   It is a gun-grabber pincher! [Reply]  [No Email]
sotxbill 12-19-2012 14:04:16 69.152.248.105 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   ear notcher [Reply]  [No Email]
jackinok 12-19-2012 13:25:09 162.58.82.136 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   crimp tool for putting together vent pipe. [Reply]  [No Email]
Slowpoke 12-19-2012 13:18:59 130.65.109.47 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   A tool for putting a slot on the edge of sheet metal. Maybe to enable a corner fold? [Reply]  [No Email]
Tom in TN 12-19-2012 13:08:47 75.149.99.233 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   Possibly a "nibbler" for cutting a slot in sheet metal? Tom in TN [Reply]  [No Email]
Gambles 12-19-2012 13:01:57 24.246.215.127 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   Looks like a vise..... (Sorry, I couldn't resist) [Reply]  [No Email]
GUIDO 12-19-2012 15:11:17 71.168.249.98 Report to Moderator	Re: Tool Challenge! in reply to Gambles, 12-19-2012 13:01:57   Hello Gambles, You noticed the vise, but did not noticed the other tool on the left upper portion of the picture. I will post them next! Guido. [Reply]  [No Email]
Gambles 12-19-2012 15:35:07 24.246.215.127 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 15:11:17   I'll be waiting because I don't know what it is either. [Reply]  [No Email]
Inno 12-19-2012 12:56:53 206.172.0.204 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   Crimper for sheet metal work? [Reply]  [No Email]
Nate V. IA 12-19-2012 12:53:04 216.51.200.25 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   Hay hook? [Reply]  [No Email]
caseyc 12-19-2012 12:51:13 75.102.189.131 Report to Moderator	Re: Tool Challenge! in reply to GUIDO, 12-19-2012 12:44:08   Ground clamp for an old welder? Casey in SD [Reply]  [No Email]