Author	[Modern View]
Larry@stinescorners 12-18-2012 12:56:15 71.125.67.123 Report to Moderator	can anyone tell me an aproximate value of a vise, Charles Parker 5 inch wide jaw,swivel. model 975 patend 1930 No cracks,welds or damage [Reply]   [No Email]
peteTheRookie 12-27-2012 06:56:21 74.78.16.14 Report to Moderator	Re: question about a vise in reply to Larry@stinescorners, 12-18-2012 12:56:15   Parker made in CT. See attached catalog photo I found on Garage.com. I am going to see a Parker 874, 4" jaws, opens to 6 3/4" and weighs a tad under 60 lbs next week. Ask is $150. Higher then I would like to pay BUT it has been restored and includes the original swivel wrench. Still cost a lot less then buying a new vise this big at today"s prices and questionable quality. Pete Parker Factory Parker Vise ID list [Reply]  [No Email]
Lanse 12-20-2012 06:25:24 206.55.217.126 Report to Moderator	Re: question about a vise in reply to Larry@stinescorners, 12-18-2012 12:56:15   Those are very nice vises, if the price is right, I'd be interested, assuming you're not across the country from me... Where abouts are you located? [Reply]  [No Email]
Diydave 12-18-2012 16:36:47 96.244.165.238 Report to Moderator	Re: question about a vise in reply to Larry@stinescorners, 12-18-2012 12:56:15   Oh, it's the little one, I gots one a little bigger. I still managed to twist the screw out of it, with a 6' cheater bar, back when I was 18. It was my first welding shop project in college welding. Managed to weld it back together, it was friction welded, 'fore I broke it, I migged it back, but got it almost 1/8" from true, but it still works! I believe Parker was made in Baltimore, IIRR. [Reply]  [No Email]
LenND 12-18-2012 14:25:11 74.207.160.118 Report to Moderator	Re: question about a vise in reply to Larry@stinescorners, 12-18-2012 12:56:15   You may have to ship it by truck freight. That could be expensive. [Reply]  [No Email]
bo 12-18-2012 14:18:58 64.30.244.104 Report to Moderator	Re: question about a vise in reply to Larry@stinescorners, 12-18-2012 12:56:15   I think it weighs just over 100lbs? Pic from web. [Reply]  [No Email]
rusted nuts 12-18-2012 15:23:37 139.55.255.128 Report to Moderator	Re: question about a vise in reply to bo, 12-18-2012 14:18:58   Can't see it weighting that much, maybe 50#. could be wrong, Shmbo saids I'm wrong once in a while. I'll pay the shipping to my place and weight it fer ya. [Reply]  [No Email]
Larry@stinescorners 12-18-2012 15:25:15 71.251.33.208 Report to Moderator	Re: question about a vise in reply to rusted nuts, 12-18-2012 15:23:37   Its heavy,you may have to come get it! [Reply]  [No Email]
bo 12-18-2012 14:09:05 64.30.244.104 Report to Moderator	Re: question about a vise in reply to Larry@stinescorners, 12-18-2012 12:56:15   ok...you won"t ship. Figure about $100 +/- [Reply]  [No Email]
bo 12-18-2012 13:42:23 64.30.244.104 Report to Moderator	Re: question about a vise in reply to Larry@stinescorners, 12-18-2012 12:56:15   Bad news Larry, that vice is junk. Ship it to me for proper disposal...I"ll pay the shipping. [Reply]  [No Email]
Larry@stinescorners 12-18-2012 13:53:30 71.251.33.208 Report to Moderator	Re: question about a vise in reply to bo, 12-18-2012 13:42:23   Its heavy! I dont think it can be shipped! lol [Reply]  [No Email]
glennster 12-18-2012 13:59:02 75.57.134.154 Report to Moderator	Re: question about a vise in reply to Larry@stinescorners, 12-18-2012 13:53:30   kruser will give you a grand for it, he needs it to crack walnuts!!! [Reply]  [No Email]
rusted nuts 12-18-2012 16:50:15 139.55.255.128 Report to Moderator	Re: question about a vise in reply to glennster, 12-18-2012 13:59:02   Thought he had all his nuts cracked!! [Reply]  [No Email]