Author	[Modern View]
Stick welding 11-25-2012 16:04:17 96.53.210.246 Report to Moderator	You've got an older Lincoln Idealarc 250 with what looks like a High frequency box on top? Also looks like an Everett(sp) chop saw and an SAE 400/300 Lincoln behind you in the welding picture? Is that a spray torch hanging up in the background too? Those are all great tools to have. Is the small MIG just for sheet metal? [Reply]   [No Email]
george md 11-25-2012 18:45:54 209.213.167.201 Report to Moderator	Re: Last nites project in reply to Stick welding, 11-25-2012 16:04:17   Stick, You are about correct on most items, the big lincoln is a 600 anp machine and it is there to run the roller and front wheel welder. In behind it there is a crank welder (from standard crankshaft),both machines are sub- arc. Have 2 sizes of small powder torches and in the machine shop I have both wire spray and powder spray (metalizing )systems. george powder torches [Reply]  [No Email]
Stick welding 11-25-2012 19:45:40 96.53.210.246 Report to Moderator	Re: Last nites project in reply to george md, 11-25-2012 18:45:54   I saw an SAF 600 sell at an auction several years ago for $150. I'm not sure if it was complete or not but it sure seemed cheap. I imagine it sucks the power pretty good. [Reply]  [No Email]
r_d97 11-25-2012 16:43:59 64.246.145.70 Report to Moderator	Re: Last nites project in reply to Stick welding, 11-25-2012 16:04:17   You should see the other parts of George"s shop with the the overhead crane or another part with the mills and lathes. The best part is he know how to use them all. That garage is more fun than any place a wrench spinner is legally allowed to go to. I know because I have been there twice. Edward [Reply]  [No Email]
george md 11-25-2012 18:26:54 209.213.167.201 Report to Moderator	Re: Last nites project in reply to r_d97, 11-25-2012 16:43:59   Thanks Edward, I have the chrome rod and the packing for your cylinders , just have to do them. george [Reply]  [No Email]