|
| |
| Tool Talk Discussion Forum |
Topic: Onan 5K Watt Generator
[Return to Forum]
| Author |
[Modern View]
|
| tomtirediron
09-06-2012 18:44:02
208.123.10.208
|
  Folks, local county surplus property auction sale has 5000 watt Onan twin cylinder LP gas generator for sale. Used to be a standby unit for Sheriffs Dept. radio tower. Hour meter reads 242 hours. I know the mechanic personally that serviced it and he said start and ran fine BUTTTT been in storage building 15 years. Model, serial as follows: 5.OCCK 08747769181 or 8cr/118481 (not sure if those #s make sense as can"t make out that well) Serial no. 374769181. I would like to get this as a small home stanby unit. Need somthing in winter months to run outdoor boiler and small furnace fan blower. Would install proper transfer switch and then manually move load around to various circuits as needed. Would also like to know if this would start submursible well pump. Well pump motor is a Franklin 6.8 amps on nameplate 230 volt single phase. The generator plate reads 120-240 volts 20.8 amps 60hz single phase. Also wondering about part availibility, cost, common touble spots ect. I know the units been stored dry and it spins over freely. Would appreciate any-all info given. Tom B. |
|
|
|
| Billy Shafer
09-09-2012 12:37:36
173.184.64.142
|
|
Re: Onan 5K Watt Generator in reply to tomtirediron, 09-06-2012 18:44:02
|
|
| Just noticed. It has the Tri-Fuel carb. Means it can run on Propane,NG or Gasoline. I have seen that carb alone go for over two hundred dollars. You will need a three wire start. Transfer switch. The CCK is the Holy Grail of smaller Onan units. |
|
|
| Billy Shafer
09-09-2012 12:26:33
173.184.64.142
|
|
Re: Onan 5K Watt Generator in reply to tomtirediron, 09-06-2012 18:44:02
|
|
| | Grab it. The CCK is the one everybody is looking for.Cummins has jacked the price of the older parts really high. But you can find cheaper prices,out there.The only weak spot is the control board. But you can get a better one from Flight Systems. Can you get a better picture of the tag. You have to many numbers.Should read. 5.0 CCK-3cr/118481 0874776918 Built in August 1974. Take care of it and it will outlast your grand kids.Average price is around 500.00 for one.Depends on condition and options. If the hour meter is correct. It is not broken in yet. Has many hours to go. If you don't want it. Just post where it is at. I know around fifty people that would be glad to have it. |
|
|
| timcasbolt
09-07-2012 16:58:05
72.23.207.250
|
|
Re: Onan 5K Watt Generator in reply to tomtirediron, 09-06-2012 18:44:02
|
|
| That's a very nice generator. It'll serve you well. |
|
|
| 36 coupe
09-07-2012 03:32:54
66.186.169.176
|
|
Re: Onan 5K Watt Generator in reply to tomtirediron, 09-06-2012 18:44:02
|
|
| Ive had Onan generator for 20 years.Mine is 120 volt only.Gasoline electric start.Runs at 1800 rpm.It developes 10 hp at that speed.I built a cart for it so I could move it outside.Ive heard parts are enpensive, havent needed any.That engine was used on welders.Best money I ever spent.Its quiet when running. |
|
|
| Skaning
09-06-2012 20:39:23
70.41.96.38
|
|
Re: Onan 5K Watt Generator in reply to tomtirediron, 09-06-2012 18:44:02
|
|
| Should not be an issue as long as there isn't a lot of other stuff on line at the same time. It's all additive. Furnace + circulating fan + pump should not exceed 20 amps. Actually 16 amps would be a safer number (80% full load) |
|
|
| Ted in NE-OH
09-06-2012 19:32:57
173.189.169.175
|
|
Re: Onan 5K Watt Generator in reply to tomtirediron, 09-06-2012 18:44:02
|
|
| My 5000 watt generator starts my 3/4 hp deep well pump easily. |
|
|
| RayP(MI)
09-07-2012 14:28:57
207.241.137.116
|
|
Re: Onan 5K Watt Generator in reply to Ted in NE-OH, 09-06-2012 19:32:57
|
|
| My 4000 watt runs my 3/4 submersable - but barks pretty good when it first kicks on. Youe unit looks like it needs a good cleaning and a little TLC. |
|
|
| RayP(MI)
09-07-2012 14:29:35
207.241.137.116
|
|
Re: Onan 5K Watt Generator in reply to RayP(MI), 09-07-2012 14:28:57
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|