|
Support YT Subscribe Today!
|
| Tool Talk Discussion Board |
Topic: Elec vs Gas Pole Saw
[Return to Forum]
| Author [expand] |
[Modern View]
|
| bob in Oakboro
10-28-2009 10:14:17
166.82.157.102
250915
|
I am thinking about buying either a electric ($99) or a gas ($250) pole saw to do some pruning with. Both have a 12 foot pole. I have a portable generator that I have on a small yard size wagon, so electricity is not a problem. I would rather not have another motor to maintain since it will probably be used for a few days every fall or spring. What are your thoughts? Any brands that you would suggest? |
|
[Reply]
[No Email] |
|
| case e
10-29-2009 11:54:45
165.206.209.230
251028
|
|
Re: Elec vs Gas Pole Saw in reply to bob in Oakboro, 10-28-2009 10:14:17
|
| I bought a pole saw attatchment for mine at Home Depot, lots of other attatchments too tiller, edger, weed wacker. |
[Reply]
[No Email] |
|
| GA Dave
10-28-2009 19:58:00
72.145.131.106
250972
|
|
| 3000OH
10-28-2009 16:58:53
96.24.175.104
250947
|
|
Re: Elec vs Gas Pole Saw in reply to bob in Oakboro, 10-28-2009 10:14:17
|
| Might check the archives here; type in pole saw as the search words. There are something like 290+ references when you type in those words. Below is just one link; I threw in a few words. |
[Reply]
[No Email] |
|
| Pat-CT
10-28-2009 13:28:40
137.99.147.17
250929
|
|
Re: Elec vs Gas Pole Saw in reply to bob in Oakboro, 10-28-2009 10:14:17
|
| i bought one at home depot, the troy built one, mine attaches to my weed wacker, 10ft pole and can disconect it in half, does just fine for me and i dont have a problem holding it, but i am 18 on the other hand.... |
[Reply]
[No Email] |
|
| bc
10-28-2009 11:31:56
69.148.145.104
250921
|
|
Re: Elec vs Gas Pole Saw in reply to bob in Oakboro, 10-28-2009 10:14:17
|
| | You answered your own question. No motors to mess with. I've had a couple elec remingtons. The new octogon slide is better. I burnt up the first one by taking the pole off and cutting 12" thick trees with a dull blade. The other key factor is weight. Holding a 12' pole with a heavy weight on the end doesn't take long to wear on the arms. The electrics are lighter although some of the gas saws use have the engine by your hand but you still have to hold it out and up in the air. After an ice storm last year, I found that a 12' saw plus me holding it up 6' in the air with my hands above my head didn't really trim all that many limbs. Another 6' step ladder didn't help with those big trees either. Even leaned a 20' ladder against the tree but I was afraid the falling cutoff limb would knock the ladder out from under me. In some places the only place to lean a ladder was on the limb you want to cutoff. I finally had a kid climb the tree with a rope tied to the saw with the pole taken off. Still have some we couldn't get to. I need a 40' pole saw. Unless you have a bucket truck, I'd get a 12' stick to test the reach and see if you would be happy buying a pole saw. Take your string trimmer or chain saw and wave it over your head for a while to test your arm strength. |
[Reply]
[No Email] |
|
| Ron Anderson
10-28-2009 10:39:57
198.69.181.144
250918
|
|
Re: Elec vs Gas Pole Saw in reply to bob in Oakboro, 10-28-2009 10:14:17
|
| I use a Remington electric pole saw and only problem was on the first models they used a twist lock system to hold the two poles from turning inside each other. Since then they made a octagon type Lock that works real well. I use electric saws while in my bucket truck with a generator and together they make a good team. Never have to pull the rope to start them and they seem to last a long time for the small investment. |
[Reply]
[Send Email] |
|
| lp gas only
10-28-2009 10:30:05
12.11.211.126
250917
|
|
Re: Elec vs Gas Pole Saw in reply to bob in Oakboro, 10-28-2009 10:14:17
|
| I rent one from Just Ask Rentals. $25 and I get an almost new one every time I rent one. They pay to fix them little motors. Gary |
[Reply]
[Send Email] |
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
|
Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
|
Home
| Manuals
| Parts
| 12-Volt Kits
| Carburetors
| Radiators
| Engine Kits
| Videos
| Books
Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|
|
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you use antique tractors, collect antique tractors, or just enjoy looking at antique tractors, welcome to our site! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 antique tractor forums, show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|