Author [expand]	[Modern View]
Dave in S MN 01-29-2009 14:29:27 216.114.240.88 12735 Report to Moderator	I need to make new boards to bolt my JD 1 1/2 hp model E engine to. I'm wondering what dimensions to use when looking for lumber and how long to make them. Thanks Dave R. [Reply]   [No Email]
Ole Shovel 01-30-2009 09:37:13 208.246.9.110 12738 Report to Moderator	Re: boards for JD E engine in reply to Dave in S MN, 01-29-2009 14:29:27   3x3 or standard 4x4 works. Length depends on what you want, if going to put on a cart later or room you have in storage. On one E I did back before you could get the repo cart parts welded up my own cart and just used angle irons on it. You need a good strong pivot on front axle if making your own cart as even the 1 1/2 is heavy enough to break a weak pivot had it happen on one cart once while loading not fun.   [Reply]   [No Email]
teddy52food 01-29-2009 17:06:11 209.237.111.169 12736 Report to Moderator	Re: boards for JD E engine in reply to Dave in S MN, 01-29-2009 14:29:27   If you need lumber , I have red oak, white oak ,and ash for sale.   [Reply]   [Send Email]
Dave in S MN 01-30-2009 07:50:06 216.114.240.88 12737 Report to Moderator	Re: boards for JD E engine in reply to teddy52food, 01-29-2009 17:06:11   Thanks anyway but I won't have any trouble finding lumber. I just need the dimensions. Thanks Dave   [Reply]   [No Email]