Author	[Modern View]
jlsmith80 10-28-2012 18:00:51 99.100.200.12 Report to Moderator	How do I drain the gear oil on my old troybuilt horse tiller. I know I fill it under the t-handle and check the level ont he side of the transmission but where do I drain it????? [Reply]   [No Email]
Todd Dykman 01-09-2013 22:27:02 24.113.60.170 Report to Moderator	Re: Troybuilt Horse Tiller in reply to jlsmith80, 10-28-2012 18:00:51   Mine has a drain plug at the bottom of the gear box. [Reply]  [No Email]
El Toro 10-29-2012 14:16:19 108.3.143.30 Report to Moderator	Re: Troybuilt Horse Tiller in reply to jlsmith80, 10-28-2012 18:00:51   Why do you want to drain the oil? Hal [Reply]  [No Email]
johnald 10-29-2012 11:21:50 74.240.136.173 Report to Moderator	Re: Troybuilt Horse Tiller in reply to jlsmith80, 10-28-2012 18:00:51   there should be a drain plug on the trans housing on the opposite side from the level plug. Also one under the tine drive shaft but its harder to getto. To drain the tine shaft gears take off the left side tine assembly and remove the bottom cover bolt with an allen wrench. [Reply]  [No Email]
rustyfarmall 10-29-2012 05:45:07 216.248.71.226 Report to Moderator	Re: Troybuilt Horse Tiller in reply to jlsmith80, 10-28-2012 18:00:51   Quoting Removed, click Modern View to see I've got one of those tillers also. I think the only way to drain the gear box is to remove the check plug and then lay the tiller over on its side. [Reply]  [No Email]