Author	[Modern View]
Buck Deere 10-31-2012 10:29:51 98.19.203.209 Report to Moderator	Does anyone have a good set of Primary reduction gears (matching set), that I could buy to put in an early styled A to make it a "LOW" low gear like the late styled A are?? Phone numbers appreciated and prices prefered. [Reply]   [No Email]
jd1938a 10-31-2012 19:46:02 66.41.93.27 Report to Moderator	Re: JD A Primary reduction gearing in reply to Buck Deere, 10-31-2012 10:29:51   At 56 horse I think the reduction gears would work great for you. I pull a 38 A with 468 cubes and I put the gears in out of a late A and it helped allot going from 2nd to 3rd rear in #5000 class. [Reply]  [No Email]
Hardline 10-31-2012 19:26:46 69.149.65.186 Report to Moderator	Re: JD A Primary reduction gearing in reply to matt bock, 10-31-2012 10:29:51   Not sure where you are. I have a set I was told that were the same out of a 60. Im in North Texas. 817 307 335four JJ [Reply]  [No Email]
Mike n Mo 10-31-2012 16:14:20 69.179.183.29 Report to Moderator	Re: JD A Primary reduction gearing in reply to Buck Deere, 10-31-2012 10:29:51   As Toot said, it won't slow you down as much as you'd like. That being said, speed is your friend on the track, concentrate on giving it a bigger set of balls and run the gear you have, or better yet, run second. Mike [Reply]  [No Email]
Buck Deere 10-31-2012 16:22:26 98.19.203.209 Report to Moderator	Re: JD A Primary reduction gearing in reply to Mike n Mo, 10-31-2012 16:14:20   I dont think my 56 hp motor could stand any more speed. I run 5000# class in low gear at wide open and it is all it wants. I thought that if I could slow it down alittle and use more RPM I could do better. [Reply]  [No Email]
toot 10-31-2012 12:13:10 72.151.190.98 Report to Moderator	Re: JD A Primary reduction gearing in reply to Buck Deere, 10-31-2012 10:29:51   You can use the reduction and pulley gear out of late A"s to slow it down some, but wont get you to 1 1/2 mph creeper gear. [Reply]  [No Email]