|
| |
| Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum |
Topic: Re: 60 Oliver row crop
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| LaRay Vanderpool
01-24-2013 14:26:51
50.108.43.186
|
I had to turn the crank, main bearings and rod bearings .010.
Looking for bearings, thank you.
|
|
[Reply] [No Email] | |
| J. Schwiebert
01-24-2013 19:17:36
209.143.54.246
|
|
Re: 60 Oliver row crop in reply to LaRay Vanderpool, 01-24-2013 14:26:51
|
| You need 10 under bearings.When a crank is ground the bearings need to be undersize because the mains and crank pins are now undersize. The rod bearings are the same as for a 66 or 77 Fleetline tractor. For the main bearing set you will need to have a couple of oil holes relocated. Now the thrust on a 60 only has a flange on one of the shells. . There are several ways you can do this. Wait till tomorrow and I will get you both the Clevite and the F-M bearing numbers. Any other questions? We have a 60 engine apart at work right now so I can look if I need to.
|
[Reply] [No Email] | |
| laray vanderpool
01-25-2013 11:12:28
50.108.43.186
|
|
Re: 60 Oliver row crop in reply to J. Schwiebert, 01-24-2013 19:17:36
|
| thank you for the info. I wood like any info. you can give me. how do you tell what engine you have, there are cast numbers 160120e ,D158, ser. 624620
|
[Reply] [No Email] | |
| J. Schwiebert
01-26-2013 18:56:16
209.143.54.246
|
|
Re: 60 Oliver row crop in reply to laray vanderpool, 01-25-2013 11:12:28
|
| How can I contact you?
|
[Reply] [No Email] | |
| laray vanderpool
01-27-2013 06:53:09
50.108.43.186
|
|
Re: 60 Oliver row crop in reply to J. Schwiebert, 01-26-2013 18:56:16
|
| my cell # is 517-462-1538. Would really appreciate it.
|
[Reply] [No Email] | |
[Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
