Author	[Modern View]
Kevin Kerr 09-13-2012 07:47:42 74.14.227.104 Report to Moderator	Can any one tell me if it is possible to swap out the two speed shift for a three speed on a 1750. I have a vibration, but it could be an alignment issue. I had the engine out to change th input shaft bearing. The main reason for asking is that I don't like the downhill coasting. [Reply]   [No Email]
old1850d 09-13-2012 18:32:55 67.22.203.175 Report to Moderator	Re: 1750 hydraulic shift in reply to Kevin Kerr, 09-13-2012 07:47:42   going to a 3 speed will change ground speeds and will give you a little more mph in road gear [Reply]  [No Email]
Kevin Kerr 09-14-2012 09:09:22 74.14.227.104 Report to Moderator	Re: 1750 hydraulic shift in reply to old1850d, 09-13-2012 18:32:55   Thanks for the info, maybe i'll just fix the vibration that I have for now. [Reply]  [No Email]
Mel in SW Iowa 09-13-2012 11:06:23 75.105.60.143 Report to Moderator	Re: 1750 hydraulic shift in reply to Kevin Kerr, 09-13-2012 07:47:42   A guy selling used Oliver parts told me that if my 1650 2 sp needed repair, it wouldn't cost me much more to change to a 3sp. IDK, I didn't try it. [Reply]  [No Email]
johncc 09-13-2012 09:39:03 24.140.42.228 Report to Moderator	Re: 1750 hydraulic shift in reply to Kevin Kerr, 09-13-2012 07:47:42   3 speed will fit. you will need oil cooler. and lines to go from over- under to in front raidator. you need different shift lever. low side still free wheels. [Reply]  [No Email]
Vernon in Ks 09-13-2012 07:51:15 66.210.29.137 Report to Moderator	Re: 1750 hydraulic shift in reply to Kevin Kerr, 09-13-2012 07:47:42   The 3 speed coasts also [Reply]  [No Email]
Kevin Kerr 09-13-2012 08:05:04 74.14.227.104 Report to Moderator	Re: 1750 hydraulic shift in reply to Vernon in Ks, 09-13-2012 07:51:15   would the three speed give me more selection of ground speed ie a little faster or slower? Or would the cost of replacing not be justified for only a minor difference. [Reply]  [No Email]