Author	[Modern View]
Brad Metcalf 08-28-2012 18:31:39 173.86.25.190 Report to Moderator	Im looking for a picture of the cylinder mounting brackets between the platform and fender and the brackets under the platform any pics will help Thanks Brad [Reply]   [No Email]
thompson mike 08-29-2012 18:42:15 99.196.64.57 Report to Moderator	Re: Super 66 3pt ? in reply to Brad Metcalf, 08-28-2012 18:31:39   Here are a couple pics of my 660. I found a note in the owners manual "1971 3pt $250.00" so I believe the second owner of this tractor had the dealer in Santa Maria J&S Equipment put this on the tractor. [Reply]  [No Email]
dblair 08-31-2012 16:21:19 69.244.231.9 Report to Moderator	Re: Super 66 3pt ? in reply to thompson mike, 08-29-2012 18:42:15   I see galvanized fittings on the cylinder they are only good for water and not rated for hydraulics when they explode they can cause serious injury up to death . replace with schedule 80 black iron which are good for 3k psi . [Reply]  [No Email]
Brad Metcalf 08-29-2012 15:51:31 173.86.25.190 Report to Moderator	Re: Super 66 3pt ? in reply to Brad Metcalf, 08-28-2012 18:31:39   Thank You B A Thats part of what Im looking for [Reply]  [No Email]
b a star 08-29-2012 15:12:49 209.50.18.223 Report to Moderator	Re: Super 66 3pt ? in reply to Brad Metcalf, 08-28-2012 18:31:39      Here is a photo of a cylincer on a 66 that was at the Summer HPOCA show in Michigan this past June. [Reply]  [No Email]
Brad Metcalf 08-29-2012 02:54:31 173.86.25.190 Report to Moderator	Re: Super 66 3pt ? in reply to Brad Metcalf, 08-28-2012 18:31:39   Thanks Mike but yours is different you can send them anyway Thanks Brad [Reply]  [No Email]
thompson mike 08-29-2012 01:26:43 166.250.32.254 Report to Moderator	Re: Super 66 3pt ? in reply to Brad Metcalf, 08-28-2012 18:31:39   I will take a few pics and send them your way. I will try to get it done on Wednesday but if I don't get time it will be Friday for sure. [Reply]  [No Email]