Hello all,
I am looking over a 6 volt 8N and notice the previous owner (deceased) had cut the generator wires to the regulator and uses a 12 volt coil. The starter and switch have also been replaced/rewired. I flushed out the old fuel, cleaned out the carb and was able to crank it fairly easy. Since the charging circuit would appear to be removed, I would like to reconnect it, but wonder if this would cause a problem using the 12 volt coil. I do not know why this was done.
Thoughts appreciated,
Thanks!
I am looking over a 6 volt 8N and notice the previous owner (deceased) had cut the generator wires to the regulator and uses a 12 volt coil. The starter and switch have also been replaced/rewired. I flushed out the old fuel, cleaned out the carb and was able to crank it fairly easy. Since the charging circuit would appear to be removed, I would like to reconnect it, but wonder if this would cause a problem using the 12 volt coil. I do not know why this was done.
Thoughts appreciated,
Thanks!