Author	[Modern View]
Gene Cuffee 03-21-2013 13:55:36 24.188.61.102 Report to Moderator	I need to find axle for adjusto-flex tandem disc harrow seris "G" [Reply]   [No Email]
BigDanT 03-21-2013 18:33:45 96.60.16.101 Report to Moderator	Re: parts in reply to Gene Cuffee, 03-21-2013 13:55:36   I got mine from a local New Holland dealer, book calls for a 15/16" axel... at the time Shoups didn"t offer that size...don"t know if they do now. Got the disc for free so I could afford to spend a little on it. I think it was about $120 [Reply]  [No Email]
Eugene Cuffee II 03-22-2013 05:26:20 24.188.61.102 Report to Moderator	Re: parts in reply to BigDanT, 03-21-2013 18:33:45   Thank You for your response and help [Reply]  [No Email]
flatlanderfool 03-21-2013 16:47:46 72.173.192.59 Report to Moderator	Re: parts in reply to Gene Cuffee, 03-21-2013 13:55:36   Just so happens that I"m working on about the same thing. After looking thru every tractor and equipment house in the nation for on the shelf, ordered one (may need two or more) from Shoupe parts. They take measurements and have them made up. Takes about three days and then add the length of shipping. I had them make up a 1" round axle (squares you can find thousands) cost of mine, 1" round at 40 inches long from bottom side of square nut. I will cut and grind the 2 " square nut to 1 1/2" x 1 1/2". tearing each gang apart one at a time, blasting and wire brush and then painting. Don"t know how many need changed out. Running the gangs loose is what screws up the axles. cost for the axle $89.00 before shipping [Reply]  [No Email]