|
| |
| Ford 9N, 2N & 8N Discussion Forum |
Topic: Ford 600 genny
[Return to Forum]
| Author |
[Modern View]
|
| TomN
02-20-2013 12:41:49
67.142.168.25
|
.... just took my ford 600 Genny for rebuild... bearing bad in front plate.... knew it was going... SoundGuy had told me that 6.5 volts was low.... Genny started making bad noise.... shut down immediatley...as to avoid further damage... will cost about $45.00 from local guy to do.... will put out 7.1 volts when finished :) Arm. is good... no damage from being "out of line"... due to not running machine after noise was heard....
... need new PTO shaft for this machine also... as spline is bent....
|
|
[Reply] [No Email] | |
| TomN
02-22-2013 12:30:38
67.142.168.20
|
|
Re: Ford 600 genny in reply to TomN, 02-20-2013 12:41:49
|
| Genny is repaired and back on.... Tractor is back in service... damage was at a minimun, as I did not run it after realized issue... 2 days/45 bucks.... he had to solder something on the arm. replace front bearing... Brushes in great shape... now puts out 7+ volts... Volt reg fine... evrything is "nominal".... :)
|
[Reply] [No Email] | |
| JMOR
02-22-2013 12:32:57
72.181.173.171
|
|
Re: Ford 600 genny in reply to TomN, 02-22-2013 12:30:38
|
| Quoting Removed, click Modern View to see
Grrreaat! :lol:
|
[Reply] [No Email] | |
| TomN
02-20-2013 13:03:50
67.142.168.25
|
|
Re: Ford 600 genny in reply to TomN, 02-20-2013 12:41:49
|
| ... I know some of the 9n and 8n generators had a 'high/low" adjustment.... this one does not... is there any credence to an adjustment in voltage regulator on a ford 640?
just curious
|
[Reply] [No Email] | |
| JMOR
02-20-2013 13:19:06
72.181.173.171
|
|
Re: Ford 600 genny in reply to TomN, 02-20-2013 13:03:50
|
| Quoting Removed, click Modern View to seeYes, VRs are adjustable. Joe Shadetree will not normally be successful in adjusting attempt, but a knowledgeable generator man can do. If he has both your VR & generator he will likely deliver as promised. :)
|
[Reply] [No Email] | |
| JMOR
02-20-2013 12:54:53
72.181.173.171
|
|
Re: Ford 600 genny in reply to TomN, 02-20-2013 12:41:49
|
| Quoting Removed, click Modern View to seeWonder where those extra 0.6 volts will come from? Certainly not from bearing!
|
[Reply] [No Email] | |
| soundguy
02-21-2013 07:00:23
173.105.143.100
|
|
Re: Ford 600 genny in reply to JMOR, 02-20-2013 12:54:53
|
| | yup. my guess is he had brush problems too.. as in no contact. it's a wonder the fields aren't cut.. see that alot.
|
[Reply] [No Email] | |
| TomN
02-20-2013 12:58:14
67.142.168.25
|
|
Re: Ford 600 genny in reply to JMOR, 02-20-2013 12:54:53
|
| JMOR... he is going to fully tet genny after done... 2 brush system appeared to be fine, but hey, I am not a generator expert... I am sure I will know more "beyond" my reasoning, once he looks at it... lol
|
[Reply] [No Email] | |
| HCooke
02-20-2013 14:55:03
70.195.71.151
|
|
Re: Ford 600 genny in reply to TomN, 02-20-2013 12:58:14
|
| Whenever I have a generator repaired, I also take
the VR so the shop can test that also.
|
[Reply] [No Email] | |
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
