Author	[Modern View]
JMOR 02-16-2013 07:39:35 72.181.173.171 Report to Moderator	Quoting Removed, click Modern View to seeA few years back, I talked to Mr. Jeffers & for $80, you send him your old regulator & he installs SS internals in you housing & sends it back to you. below is one he did that was written up on a Corvette web site. [Reply]   [No Email]
G6 at Snook, TX 02-16-2013 15:43:00 69.39.48.218 Report to Moderator	Re: junky vregs in reply to JMOR, 02-16-2013 07:39:35   Quoting Removed, click Modern View to see Still 6volt after his work? JMOR, have you been satified with his work? (I assume so since you mentioned it.) [Reply]  [No Email]
JMOR 02-16-2013 18:42:27 66.87.73.23 Report to Moderator	Re: junky vregs in reply to G6 at Snook, TX, 02-16-2013 15:43:00   unfortunately, not a good assumption as I do not have first hand experience with his product. Wish I could say that I did. I have talked with him at length and can say that he is not a wet behind the ears novice! He knows Generator details that many so called experts haven't even imagined yet. I trust him. [Reply]  [No Email]
soundguy 02-16-2013 12:35:13 184.245.216.69 Report to Moderator	Re: junky vregs in reply to JMOR, 02-16-2013 07:39:35   nice looking. more parts than I would have thought needed. just need field curent control transistor.. perhaps a comparitor circuit and a solid state device ( big slicon) for the cutout... still.. real nice looking.. [Reply]  [No Email]
JMOR 02-16-2013 15:23:32 66.87.18.252 Report to Moderator	Re: junky vregs in reply to soundguy, 02-16-2013 12:35:13   Quoting Removed, click Modern View to seeIf I recall, his has a Hall effect current sensor & does all 3 functions of old school VRs, cut out, voltage reg, and current regulation. [Reply]  [No Email]
soundguy 02-16-2013 15:38:13 184.245.216.69 Report to Moderator	Re: junky vregs in reply to JMOR, 02-16-2013 15:23:32   nice! [Reply]  [No Email]