Author	[Modern View]
Tom Beddard ENC 02-12-2013 17:35:05 173.219.98.53 Report to Moderator	I finally got all the rookie electrical errors on my 46 2N round can conversion corrected. I also put a basic rebuild kit in the TSX 33 after cleaning it many times as suggested and making sure all passages were clear. It starts easily with all carb adjustments made according to instructions on this site. I put a cultivator on and went to the field to put under load to ck it out. It would stumble now and then under really heavy load but it did not die. Can this be corrected, if so how? [Reply]   [No Email]
Dell (WA) 02-12-2013 21:54:12 174.24.195.75 Report to Moderator	Re: Carb Adjustment Question in reply to Tom Beddard ENC, 02-12-2013 17:35:05   Tom........just make certain, Cookie's 1/2-3/4 turn is in addition to yer current down-pointing mainjet setting. (you know 1+1=2) ........Dell [Reply]  [No Email]
Tom Beddard ENC 02-13-2013 15:13:39 173.219.98.53 Report to Moderator	Re: Carb Adjustment Question in reply to Dell (WA), 02-12-2013 21:54:12   Thanks Dell, it's set at 2 turns out now, just as you guys said. I'd never be at this point with this tractor without the help from everyone on this forum. [Reply]  [No Email]
Tom Beddard ENC 02-12-2013 17:52:40 173.219.98.53 Report to Moderator	Re: Carb Adjustment Question in reply to Tom Beddard ENC, 02-12-2013 17:35:05   Thanks HCooke- I'll try that as soon as the weather allows. It's suppose to rain here again tomorrow. But thankful it's not snow. 55 degrees at almost 9PM in eastern NC [Reply]  [No Email]
HCooke 02-12-2013 17:37:19 70.195.64.19 Report to Moderator	Re: Carb Adjustment Question in reply to Tom Beddard ENC, 02-12-2013 17:35:05   Open Main needle 1/4 to 1/2 turn. [Reply]  [No Email]