Author	[Modern View]
Petey156 10-27-2012 14:20:16 98.30.12.206 Report to Moderator	I have read that Rustoleum smoke gray is very close to the original dark gray on my 9n. A previous owner painted it like an 8n. I have it apart now and want to paint it back to gray. If I paint the engine the rustoleum smoke gray. How will it last, on the engine due to the heat. Is there high temp dark gray engine paint? Thank you Preston Thank you. [Reply]   [No Email]
Bill Memphis 10-29-2012 11:57:54 75.65.48.30 Report to Moderator	Re: Painting my 9n in reply to Petey156, 10-27-2012 14:20:16   I forgot to mention that photos of my 41' 9N are posted on this site in the tractor photo gallery. Tagged as 41' 9N Bill A. TN. Have a look, picture is worth a thousand words. [Reply]  [No Email]
Pete76NY 10-29-2012 00:27:47 66.194.51.226 Report to Moderator	Re: Painting my 9n in reply to Petey156, 10-27-2012 14:20:16   We used it on our 2N...liked the color although it may have been just a tad too light, but we didn't use any hardner...it's pretty much faded to just a primer looking color now, even with waxings...I will not use it again when I redo it, and if I were to use it again I would sock the hardner to it. [Reply]  [No Email]
Petey156 10-28-2012 18:10:17 98.30.12.206 Report to Moderator	Re: Painting my 9n in reply to Petey156, 10-27-2012 14:20:16   Will the smoke gray rustoleum give it a gloss look with out a clear coat? How about fuel resistance? [Reply]  [No Email]
Royse 10-28-2012 16:16:49 69.36.49.151 Report to Moderator	Re: Painting my 9n in reply to soundguy, 10-27-2012 14:20:16   Quoting Removed, click Modern View to see If you have bare metal, for sure. Rustoleum paint over Rustoleum primer. [Reply]  [No Email]
Bill Memphis 10-28-2012 16:10:53 75.65.48.30 Report to Moderator	Re: Painting my 9n in reply to Petey156, 10-27-2012 14:20:16   I used the smoke grey on my 9N and am very pleased. Go for it. [Reply]  [No Email]
Petey156 10-28-2012 16:11:53 98.30.12.206 Report to Moderator	Re: Painting my 9n in reply to Bill Memphis, 10-28-2012 16:10:53   should I prime first? [Reply]  [No Email]
soundguy 10-27-2012 15:59:16 107.41.14.131 Report to Moderator	Re: Painting my 9n in reply to Petey156, 10-27-2012 14:20:16   paint will burn off the hot part of the manifold.. but is fine on the head and block [Reply]  [No Email]
Colin King 10-27-2012 14:47:16 67.233.229.23 Report to Moderator	Re: Painting my 9n in reply to Petey156, 10-27-2012 14:20:16   The only area on the engine that requires a high-temp paint is the manifold. I don't paint my manifold, but a lot of guys use a high-temp black. Colin, MN [Reply]  [No Email]
Petey156 10-27-2012 15:23:07 98.30.12.206 Report to Moderator	Re: Painting my 9n in reply to Colin King, 10-27-2012 14:47:16   ok I did not know about painting the head and block. Thank you. [Reply]  [No Email]