Author	[Modern View]
gblj 10-26-2012 15:22:16 69.51.147.41 Report to Moderator	I bought a drawbar lock and put it on today, let me know if I installed it the right way, the drawbar still rolls a little to the front and rear, is this ok? [Reply]   [No Email]
Kenster 10-31-2012 15:35:35 166.147.72.27 Report to Moderator	Re: Drawbar lock in reply to gblj, 10-26-2012 15:22:16   I bought one about three years ago. Got home and found out that it was WAY too big. Must be for Cat 3 equipment. Still sitting on the shelf in the shed and I never got around to getting a correct one but rarely need it anyway unless I'm pulling my log splitter. [Reply]  [No Email]
W_B 10-29-2012 06:05:36 155.188.247.24 Report to Moderator	Re: Drawbar lock in reply to GB in MT., 10-26-2012 15:22:16   I've bent a few sets that way. That's some tough steel to straighten out too! [Reply]  [No Email]
Gary (Or) 10-28-2012 07:44:19 174.25.46.228 Report to Moderator	Re: Drawbar lock in reply to gblj, 10-26-2012 15:22:16   I shimmed mine. Gary (Or) [Reply]  [No Email]
maxwell99 10-27-2012 16:31:54 208.66.244.245 Report to Moderator	Re: Drawbar lock in reply to gblj, 10-26-2012 15:22:16   gb, it looks right to me. my old crossbar hitch appears to be a little thicker than yours so with that it might make it tigher and have less roll. just be sure to lock down your lift lever so you do not hit it with you foot getting off the tractor raising the lift and bending your stabilizer arms. I bought a hitch that fit under the belly of my tractor, hitch bar just slides in/out and i like it better than the cross bar. however, the cross bar is good for pulling fence post. [Reply]  [No Email]
petermiddletn 10-27-2012 05:56:40 67.142.174.20 Report to Moderator	Re: Drawbar lock in reply to gblj, 10-26-2012 15:22:16   bought one myself, works well, never remove it, iza just slide it up the arm when not needed. [Reply]  [No Email]
flembo 10-27-2012 04:37:13 66.31.12.12 Report to Moderator	Re: Drawbar lock in reply to gblj, 10-26-2012 15:22:16   you have it on correct I have used one for years and don't even take it off when using other implements just slide it back on the lift arm out of the way. [Reply]  [No Email]
Del Huebner 10-26-2012 17:39:54 173.18.13.41 Report to Moderator	Re: Drawbar lock in reply to gblj, 10-26-2012 15:22:16   I think I see TSC on the label. Could I ask you what you paid for it? I am interested in one like that. Thanks, Del [Reply]  [No Email]
gblj 10-26-2012 19:14:19 69.51.147.41 Report to Moderator	Re: Drawbar lock in reply to Del Huebner, 10-26-2012 17:39:54   Yes, its TSC $21.19 out the door. [Reply]  [No Email]
hardscrabble 10-26-2012 16:35:56 63.131.176.27 Report to Moderator	Re: Drawbar lock in reply to gblj, 10-26-2012 15:22:16   Looks right to me. The lock doesn"t actually lock it. It just keeps it from rotating. You want some free play. [Reply]  [No Email]