Author	[Modern View]
mss3020 10-25-2012 06:17:59 209.50.18.9 Report to Moderator	So I rebuilt the neighbors distributor off his 2N. The distributor has two "tabs" or whatever you call them that will fit into the block in a slot..I marked where the rotor faced before I took it off as to remember to put it back on that way. BUT. how do I know that the neighbor or someone before didnt put it in 180 degree different. The tabs dont appear to be different so in my mind could be possible. The reason i ask is it runs at idle alittle rough. not bad but I just cant seem to get it adjusted to run nice and smooth.. Do these tractors idle smooth..I might add that the last 4 feet of exhaust is shot dont know that that matters alot. [Reply]   [No Email]
mss3020 10-25-2012 07:02:17 209.50.18.9 Report to Moderator	Re: Neighbors 2N distributor ??? in reply to mss3020, 10-25-2012 06:17:59   thanks... duh... that does make sence....Sometimes you cant see the forest for the trees... lol So how smooth do these tractors idle...maybe im expecting too much... Im comparing it to my 3020 that purrs at idle.. [Reply]  [No Email]
Dell (WA) 10-25-2012 12:40:28 63.226.214.198 Report to Moderator	Re: Neighbors 2N distributor ??? in reply to mss3020, 10-25-2012 07:02:17   mss3020........ruff idle? Replace yer sparkie wires with NEW COPPER-CORE sparkie wire cut to length. ($15, cheap) You doubt? Go out on dark knight and watch them lazy sparkies dance on top of the dried out and cracked insulation. I bought some "hot-rod" sparkie wires fer Pontiac-V8 so I had right-angle insulation booties over the sparkies (have 4-spare, grin) .........Dell, yer self-appointed sparkie-meister [Reply]  [No Email]
mss3020 10-25-2012 14:20:28 209.50.18.9 Report to Moderator	Re: Neighbors 2N distributor ??? in reply to Dell (WA), 10-25-2012 12:40:28   will do .... thanks [Reply]  [No Email]
JMOR 10-25-2012 06:46:02 72.181.173.171 Report to Moderator	Re: Neighbors 2N distributor ??? in reply to soundguy, 10-25-2012 06:17:59   Quoting Removed, click Modern View to seeAs TOH said, plus you said that it runs & if due to really, really excessive cam/distributor wear you could insert it backwards, it would not run. Verify #4, #3 wires: [Reply]  [No Email]
mss3020 10-25-2012 07:03:33 209.50.18.9 Report to Moderator	Re: Neighbors 2N distributor ??? in reply to JMOR, 10-25-2012 06:46:02   Ive never checked to make sure plug wires were put on correctly.. will do.. thanks [Reply]  [No Email]
TheOldHokie 10-25-2012 06:35:45 108.8.1.127 Report to Moderator	Re: Neighbors 2N distributor ??? in reply to old, 10-25-2012 06:17:59   Quoting Removed, click Modern View to see The tangs are offset from the center line and it only goes on one way. You need to bench set the static ignition timing off of the proper side of the tangs so if you didn't see the difference when installing the new points you need to double check the timing. TOH [Reply]  [No Email]