Author	[Modern View]
maw1977 10-16-2012 09:34:06 70.193.64.207 Report to Moderator	Does anyone know of a conversion kit or a new ring and pinion gear set i can install to lower the mph on my 2n tractor it doesnt have alot of pulling power to begin with and it seems to run to fast in 1st gear i was wanting this to slow the mph at high rpm"s thanks mark [Reply]   [No Email]
Dell (WA) 10-16-2012 17:29:23 63.226.223.25 Report to Moderator	Re: hi low conversion for 2n 3 speed tranny in reply to maw1977, 10-16-2012 09:34:06   maw........NO CHANGE ring'n'pinion; 6:1. Most Sherman's are OVERDRIVE so you end up going faster. There was a rare Sherman UNDERDRIVE. Most popular choice for "slower" gears is the Sherman 3-speed aux tranny. Yer "cheapest and best" option to go slower is don't pull the throttle lever so high. Simple, eh? ........Dell [Reply]  [No Email]
R Geiger 10-16-2012 15:12:44 50.39.138.117 Report to Moderator	Re: hi low conversion for 2n 3 speed tranny in reply to Bob Harvey, 10-16-2012 09:34:06   Quoting Removed, click Modern View to see If you were a bit closer, I would ake you up on it!! even if I have nothing to till up!! 5 acres of trees!! [Reply]  [No Email]
Bob Harvey 10-16-2012 16:49:10 209.91.107.144 Report to Moderator	Re: hi low conversion for 2n 3 speed tranny in reply to R Geiger, 10-16-2012 15:12:44   Heck, all ya gotta do is drive through Wash., take a ferry 'et voila'! b [Reply]  [No Email]
1951 8N 10-16-2012 13:32:33 98.16.76.197 Report to Moderator	Re: hi low conversion for 2n 3 speed tranny in reply to maw1977, 10-16-2012 09:34:06   Quoting Removed, click Modern View to see He has a 2N, so it will give him 9 forward and 3 reverse. [Reply]  [No Email]
fordtractorpro 10-16-2012 11:27:50 71.236.76.193 Report to Moderator	Re: hi low conversion for 2n 3 speed tranny in reply to maw1977, 10-16-2012 09:34:06   I will have a hi/low sherman in the coming weeks. It will give you 12 forwards and 3 reverses. [Reply]  [No Email]
R Geiger 10-16-2012 10:30:57 50.39.138.117 Report to Moderator	Re: hi low conversion for 2n 3 speed tranny in reply to MikeT, 10-16-2012 09:34:06   Quoting Removed, click Modern View to see My Howard really is not that usefull on a day to day basic. I use it sometimes when mowing a tricky spot. Would be good for what it was made for. Rototiller! [Reply]  [No Email]
Bob Harvey 10-16-2012 14:49:29 209.91.107.144 Report to Moderator	Re: hi low conversion for 2n 3 speed tranny in reply to R Geiger, 10-16-2012 10:30:57   I've got a Howard Rotovator you can HAVE, come pick it up. [Reply]  [No Email]
TheOldHokie 10-16-2012 09:47:59 108.8.10.15 Report to Moderator	Re: hi low conversion for 2n 3 speed tranny in reply to Jim.UT, 10-16-2012 09:34:06   Quoting Removed, click Modern View to see Shernam combination step down/up transmission or a Howard gear reduction unit. The Sherman is relatively scarce and te Howard more so. TOH TOH [Reply]  [No Email]